1. How to use

Unix/Linux/etc. prompt example. The output data format refers 5. 4 2. Input data of vehicle spec. 3780 ! curb vehicle mass (kg) 4000 ! payload (kg) ...

0 downloads 236 Views 168KB Size
Instruction manual (c++ version) 1.

How to use



Construction of conversion program

Execution program Evironment Configuration File Sample Driving Pattern File Sample file of vehicle spec. Sample file of maximum torque.

Convert.exe Convert_MVCV6.exe Convert_MVCNET.exe Gconvert Convert

:Borland; C++Builder, Version 5 :Microsoft(R); Visual C++(R), Version 6* :Microsoft(R); Visual C++(R), Version Net* :Win32. GNU C++* : Unix/Linux/etc. GNU C++

*These executable files are not available.

1



Editing of a vehicle specification, maximum engine torque and driving pattern. How to edit refers 2.- 4. Sample file vehicle specification data :example) spec_15.txt maximum engine torque data :example) maxtq_15.txt driving pattern data :example) moe_ed12.txt



Describing of driving pattern data file and a vehicle specification file and a maximum engine torque data file in a “Envfile.cfg” file.

Driving pattern data Vehicle spec. data Maximum engine torque data

2



Double-click

Convert.exe”,”Convert_MVCV6.exe”,”Convert_MVCNET.exe”,”Gconvert.exe”,”Conve rt”, and then input the file names respectively. Windows dos-prompt example. “

Unix/Linux/etc. prompt example.

The output data format refers 5. 3

2. Input data of vehicle spec.

3780 4000 2 2.469 2.230 0.465 6 8.064 5.443 3.064 1.824 1.321 1.000 4.444 600 2700 2900

! curb vehicle mass (kg) ! payload (kg) ! crew (persons) ! overall height (m) ! overall width (m) ! tire rolling radius (m) ! number of gear ! 1st gear ratio ! 2nd gear ratio ! 3rd gear ratio ! 4th gear ratio ! 5th gear ratio ! 6th gear ratio ! final gear ratio ! idling engine speed (rpm) ! rated engine speed (rpm) ! governed engine speed (rpm)

3. Input data of maximum engine torque

rev(rpm) torque(Nm) 610 534 620 537 626 542 635 546 643 548 650 550 658 556 667 552 674 557 682 556 690 557 698 559 706 560 715 567 723 575 730 573 739 574 746 575 755 585 762 588 Number of data should be more than 5 points

4

4. Input data of driving pattern data

time 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

vel 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4.19 8.32 12.33 16.05 18.74 20.28 21.48 23.13 25.17 27.19 28.97 30.43 31.46 32.24 33.16

5

5. Output data format

time(s) Vtarget(km/h) Vreal(km/h) 0 0.00 0.00 1 0.00 0.00 2 0.00 0.00 3 0.00 0.00 4 0.00 0.00 5 0.00 0.00 6 0.00 0.00 7 0.00 0.00 8 0.00 0.00 9 0.00 0.00 10 0.00 0.00 11 0.00 0.00 12 0.00 0.00 13 0.00 0.00 14 0.00 0.00 15 0.00 0.00 16 0.00 0.00 17 0.00 0.00 18 0.00 0.00 19 0.00 0.00 20 0.00 0.00 21 0.00 0.00 22 0.00 0.00 23 0.00 0.00 24 0.00 0.00 25 4.19 4.19 26 8.32 8.32 27 12.33 12.33 28 16.05 16.05 29 18.74 18.74 30 20.28 20.28 31 21.48 21.48 note)

Vtarget Vreal Ne Te n_norm T_norm

: : : : : :

Ne(rpm) Te(N-m) N_norm(%) T_norm(%) Shift 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 600.0 0.0 0.00 0.00 0 705.0 244.4 5.00 43.67 2 1148.6 241.3 26.12 31.83 2 958.2 320.4 17.06 49.16 3 1247.3 299.2 30.82 38.65 3 1456.3 222.2 40.78 27.64 3 1576.0 135.9 46.48 17.06 3 1669.3 110.6 50.92 14.22 3

target speed real speed engine speed engine torque normarized engine speed = (engine speed - idling engine speed)/(rated engine speed - idling engine speed) normarized engine torque = engine torque / maximum engine torque

6