DATA SHEET Summit X770 Series

Summit X770 supports Spanning Tree (802.1D), Per VLAN Spanning Tree (PVST+), Rapid Spanning Tree (802.1w) and Multiple Instances of Spanning Tree (802...

0 downloads 52 Views 512KB Size
DATA SHEET

Summit X770 Series BENEFITS HIGHLIGHTS The Summit X770 series switches are high-density, purpose-built top-of-rack switches designed to support emerging 10 Gigabit Ethernet and 40 Gigabit Ethernetenabled servers in enterprise and cloud data centers. Summit X770 helps optimize new server deployments with its 40 GbE ports – each can be used natively as

Overview Summit X770 provides high density for 40 Gigabit Ethernet and 10 Gigabit Ethernet switching in a small 1RU form factor.

uplinks to BlackDiamond X8 chassis or

With its versatile design, the Summit X770 series provides high density Layer 2/3

other Summit X770 acting as spines – and

switching with low latency cut-through switching, and IPv4 and IPv6 unicast and

each 40GbE port can connect directly

multicast routing to enable enterprise aggregation and core backbone deployment

to servers using 40GbE speeds or by

in AC-powered and DC-powered environments.

breaking down into 10GbE connections acting as the leaf.

Summit X770 series simplifies network operation with the ExtremeXOS modular operating system (OS), which is used among all Extreme Networks Summit and

The Summit X770 can be used as a spine

BlackDiamond Ethernet switches. The high availability ExtremeXOS operating

or a leaf in fat tree topologies for servers

system provides simplicity and ease of operation through the use of one OS

with 10GbE and 40GbE ports.

everywhere in the network.

SIZE & WEIGHT • Height = 1.73” • Width = 17.36” • Depth = 19.37” • Weight = 16.1 lbs.

PORTS • 32 x 40GBase-X QSFP+ • 1 RJ-45 Serial Port

40 GIGABIT ETHERNET & 10 GIGABIT ETHERNET PORTS The Summit X770 model provides 32 x 40 GbE QSFP+ ports which can accept QSFP+ passive and active cables, as well as QSFP+ transceivers. 40 GbE ports can be configured as a 40 GbE port or as four 10 GbE ports. The 10 GbE port mode can be supported by a 40GBASE-SR4 QSFP+ transceiver and fan-out optical cables, and is compatible with the 10GBASE-SR optical interface for distances up to 100 meters. 24 of the 32 QSFP+ ports can be broken into 4 ports of 10GbE. The remaining 4 ports of QSFP+ can also be converted into a single port of 10GbE giving a maximum of 104 ports of 10GbE connections in a 1 RU device. The Summit X770 is capable of Layer 2 and Layer 3 forwarding at up to 1904 million packets per second forwarding rate.

• 1 RJ45 Ethernet Management Port

HIGH-SPEED STACKING

• 1 USB Port (rear)

Summit X770 supports three different types of stacking: SummitStack-320,

• 2 Mini BNC Ports (rear) 1588 output

SummitStack-160, and SummitStack-V. SummitStack-320 provides high speed stacking running at 320 Gbps through the SummitStack-320 technology. SummitStack-320 can be enabled on four 40 Gigabit Ethernet QSFP+ ports as stacking interfaces. SummitStack-160 provides high-speed stacking running at 160 Gbps through the SummitStack-160 technology. SummitStack-160 can be enabled on two 40 Gigabit Ethernet QSFP+ ports as stacking interfaces. SummitStack-V provides high-speed stacking running at 40 Gbps through the SummitStack-V technology. SummitStack-V can be enabled on two 40 Gigabit Ethernet QSFP+ ports configured as 10GbE stacking interfaces.

Summit X770 – Data Sheet

1

1588 PRECISION TIME PROTOCOL (PTP) Summit X770 offers Boundary Clock (BC), Transparent Clock (TC), and Ordinary Clock (OC) for synchronizing phase and

network traffic that requires lossless throughput to be prioritized, while other traffic types that do not require or perform better without PFC can continue as normal.

frequency and allowing the network and the connected devices

DATA CENTER BRIDGING (DCB)

to be synchronized down to microseconds of accuracy over

The Summit X770 series supports Data Center Bridging features

Ethernet connection.

such as Priority Flow Control (PFC), Enhanced Transmission

LOW LATENCY SWITCHING FOR HIGH-FREQUENCY TRADING AND CLUSTER COMPUTING Summit X770 can achieve latency less than 600 nanoseconds

Selection (ETS) and Data Center Bridging eXchange (DCBX) for data center convergence.

SOFTWARE DEFINED NETWORKING (SDN) OPENFLOW

and supports cut-through switching to help optimize the high

ExtremeXOS implementations of OpenFlow APIs allow an

frequency trading application as well as latency-sensitive

external OpenFlow-based SDN controller to access and

cluster computing.

control the forwarding plane of ExtremeXOS network devices.

GREEN DESIGN – LOW POWER CONSUMPTION WITH OPTIMIZED COOLING OPTIONS

through OpenFlow to enable a high degree of automation in provisioning network services for many upper layer business-

The Summit X770 series is designed to be environmentally green.

critical applications running the OpenFlow-based SDN controller.

ExtremeXOS-based switches offer a programming interface

System power consumption is very low at both high-load and idle situations through the power-efficient hardware design. The power supplies are also highly efficient, which minimizes the loss of power and unnecessary heat generated by the power supply. Summit X770 series switches can be used in AC or DC powered environments.

DESIGNED FOR CLOUD DATA CENTERS – VEPA, XNV, DCB, OPENFLOW, OPENSTACK Summit X770 has a variety of features that fit your data center needs.

DIRECT ATTACH (VEPA) With the optional feature pack, Summit X770 switches can support Direct Attach (VEPA), which eliminates the virtual switch layer, simplifying the network and improving performance. Direct Attach enables data center simplification by reducing network tiers from 4 or 5 tiers to just 3 or 2 tiers, depending on the size of the data center.

OPENSTACK ExtremeXOS-based switches also allow for integration with the OpenStack open source cloud computing platform for public and private clouds through the Extreme Networks Quantum plugin. The plugin provides a scalable, automated, rich APIdriven system that enables networking-as-a- service model managing data center interconnect solutions and large multitenant networks.

VIRTUAL ROUTERS In a virtualized environment there is a requirement to support multiple tenants. In an effort to isolate tenants from each other, logical separation is established at Layer 3 and Layer 2 level. ExtremeXOS supports multiple, isolated Layer 3 forwarding domains by way of Virtual Routers.

ENTERPRISE CORE CLASS SCALABILITY The Summit X770 series offers more cost-effective 10 Gigabit

EXTREMEXOS NETWORK VIRTUALIZATION (XNV) To further enhance data center operations, Summit X770 switches support XNV (ExtremeXOS Network Virtualization), which is natively supported in the ExtremeXOS operating system and is a licensable feature pack for Ridgeline, a network and service management application, sold separately. XNV provides insight, control and automation for virtualized data centers.

Ethernet switches, for both small-sized core backbone and traditional three-tier network architectures. Summit X770 series can support 10 Gigabit Ethernet campus aggregations with its core class routing and switching scalability.

ONE OPERATING SYSTEM Extreme Networks simplifies network operation by offering one common OS – ExtremeXOS – throughout the BlackDiamond and

PFC Summit X770 switches also support Priority-based Flow Control (PFC, or IEEE 802.1Qbb), which allows network traffic to be controlled independently based on Class of Service. PFC allows

Summit portfolio. From 10/100 Mbps switching products such as Summit X430 and Summit X440 to the multi-10 gigabit core backbone BlackDiamond modular chassis switches, all switches can run the same version of the OS, which helps deploy, operate and maintain your entire network and reduce operating costs.

Summit X770 – Data Sheet

2

Figure 1: Top of Rack Switch for Servers in the Enterprise Data Center

Modular Operating System for Non-Stop Operation LOADABLE SOFTWARE MODULES

Bidirectional Forwarding Detection (BFD) is a hello protocol that provides the rapid detection of failures in the forwarding path and helps the separation of control plane connectivity from forwarding plane connectivity. By having multiple control plane protocols like OSPF or MPLS rely on BFD to detect forwarding

The modular design of the ExtremeXOS OS allows the adding

plane connectivity failures, network operators can benefit from

or upgrading of individual software modules dynamically

simpler network profiling and planning, and consistent and

without requiring a system reboot, leading to higher

predictable re-convergence times.

availability in the network.

PREEMPTIVE MULTITASKING AND PROTECTED MEMORY

MPLS On the Summit X770 series switches MPLS can be enabled, if needed, by way of an optional feature pack. MPLS provides

Summit X770 series switches allow each of many applications—

the ability to implement traffic engineering and multi-service

such as Open Shortest Path First (OSPF) and Spanning Tree

networks, and improve network resiliency. The MPLS protocol

Protocol (STP)—to run as separate OS processes that are

suite provides the ability to deploy services based on L2VPNS

protected from each other. This drives increased system integrity

(VPLS/VPWS), BGP-based L3VPNS; LSP Establishment based

and inherently protects against cross-platform DoS attacks.

on LDP, RSVP-TE, Static provisioning; Integrated OAM tools like VCCV, BFD and CFM; And MPLS Fast Reroute to support rapid

PROCESS MONITORING AND RESTART

local convergence around network failures.

ExtremeXOS increases network availability using process

High Availability Network Protocols

monitoring and restart. Each independent OS process is monitored in real time. If a process becomes unresponsive or stops running, it can be automatically restarted.

ETHERNET AUTOMATIC PROTECTION SWITCHING (EAPS)

Rich OAM Suite – CFM, Y.1731, BFD

uptime that users expect from their traditional voice network.

EAPS allows the IP network to provide the level of resiliency and

Summit X770 series switches supports a rich suite of protocols

EAPS is more adaptable than Spanning Tree or Rapid Spanning

to help with Operations, Administration and Maintenance.

Tree protocols and can achieve sub-second (less than 50

Connectivity Fault Management (CFM) allows detection, verification, and isolation of connectivity failures in virtual bridged LAN. Y.1731 is largely similar to CFM but also supports performance management by way of frame delay and frame delay variation measurements.

milliseconds) recovery that delivers consistent failover regardless of the number of VLANs, network nodes or network topology in Extreme Networks-recommended configurations.. EAPS functionality increases network recovery time, which results in significant reduction in Voice-over IP call drop rates and improvement in digital video performance in supported solution configurations..

Summit X770 – Data Sheet

3

Figure 2: Summit X770 High Speed Uplink Option

SPANNING TREE/RAPID SPANNING TREE PROTOCOLS

HARDWARE REDUNDANCY Summit X770 series switches support a dual redundant AC/DC

Summit X770 supports Spanning Tree (802.1D), Per VLAN

power supply to provide high availability. The power supply can

Spanning Tree (PVST+), Rapid Spanning Tree (802.1w) and

be hot-swapped and replaced should it fail. Summit X770 also

Multiple Instances of Spanning Tree (802.1s) protocols for

supports standardized N+1 redundant hot-swappable fan units.

Layer 2 resiliency.

SOFTWARE-ENHANCED AVAILABILITY Software-enhanced availability allows users to remain connected to the network even if part of the network infrastructure is down. Summit X770 continuously checks for problems in the uplink connections using advanced Layer 3 protocols such as OSPF, VRRP and Extreme Standby Router Protocol (ESRP, supported in Layer 2 or Layer 3), and dynamically routes traffic around the problem.

EQUAL COST MULTIPATH Equal Cost Multipath (ECMP) routing allows uplinks to be load balanced for performance and cost savings while also supporting redundant failover. If an uplink fails, traffic is automatically routed to the remaining uplinks and connectivity is maintained.

LINK AGGREGATION (802.3AD)

Robust IP and MAC Security Framework MEDIA ACCESS CONTROL (MAC) LOCKDOWN MAC security allows the lockdown of a port to a given MAC address and limiting the number of MAC addresses on a port. This capability can be used to dedicate ports to specific hosts or devices such as VoIP phones or printers and avoid abuse of the port—a capability that can be especially useful in environments such as hotels. In addition, an aging timer can be configured for the MAC lockdown, protecting the network from the effects of attacks using (often rapidly) changing MAC addresses.

IP SECURITY ExtremeXOS IP security framework helps protect the network infrastructure, network services such as DHCP and DNS and host computers from spoofing and man-in-the-middle attacks. It also protects the network from statically configured and/or spoofed IP addresses and builds an external trusted database of MAC/

Link aggregation allows trunking of up to eight links on a single

IP/port bindings providing the traffic’s source from a specific

logical connection, for up to 80 Gbps of redundant bandwidth

address for immediate defense.

per logical connection.

MULTI-SWITCH LAG (M-LAG) M-LAG can address bandwidth limitations and improve network resiliency, in part by routing network traffic around bottlenecks, reducing the risks of a single point of failure, and allowing load balancing across multiple switches.

Summit X770 – Data Sheet

4

4+1 Redundant Fan Tray

1588 Precision Time Protocol (PTP) Output Ports for 1PPS and 1090MHZ Signals

Redundant AC-DC PSU Summit X770

IDENTITY MANAGEMENT Identity Manager allows network managers to track users

ACLs and 1,024 egress ACLs per system based on Layer 2-,

who access their network. User identity is captured based

3- or 4-header information such as the MAC or IP source/

on NetLogin authentication, LLDP discovery and Kerberos

destination address. ACLs are used for filtering the traffic, as

snooping. ExtremeXOS uses the information to then report on

well as classifying the traffic flow to control bandwidth, priority,

the MAC, VLAN, computer hostname, and port location of the

mirroring, and policy-based routing/switching.

user. Further, Identity Manager can create both roles and policies, and then bind them together to create role-based profiles based on organizational structure or other logical groupings, and apply them across multiple users to allow appropriate access to network resources. In addition, support for Wide Key ACLs further improves security by going beyond the typical source/ destination and MAC address as identification criteria access mechanism to provide filtering capabilities.

Threat Detection and Response CLEAR-FLOW SECURITY RULES ENGINE CLEAR-Flow Security Rules Engine provides first-order threat detection and mitigation, and mirrors traffic to security appliances for further analysis of suspicious traffic in the network.

SFLOW

DENIAL OF SERVICE PROTECTION Summit X770 series effectively handles Denial of Service (DoS) attacks. If the switch detects an unusually large number of packets in the CPU input queue, it assembles ACLs that automatically stop these packets from reaching the CPU. After a period of time these ACLs are removed, and reinstalled if the attack continues. ASIC-based LPM routing eliminates the need for control plane software to learn new flows, allowing more network resilience against DoS attacks.

SECURE AND COMPREHENSIVE NETWORK MANAGEMENT As the network becomes a foundation of the enterprise application, network management becomes an important piece of the solution. Summit X770 supports comprehensive network management through Command Line Interface (CLI), SNMP v1,

Summit X770 series supports hardware-based sFlow® sampling

v2c, v3, and ExtremeXOS ScreenPlay embedded XML-based

that provides the ability to sample application-level traffic flows

Web user interface. With a variety of management options

on all interfaces simultaneously.

and consistency across other Extreme Networks modular and stackable switches, Summit X770 series switches provide ease of

PORT MIRRORING

management for demanding converged applications.

To allow threat detection and prevention, Summit X770 supports

Extreme Networks has developed tools that simplify and help

many-to-one and one-to-many port mirroring. This allows the

in efficiently managing your network. Ridgeline network and

mirroring of traffic to an external network appliance such as an

service management provides fault, configuration, accounting,

intrusion detection device for trend analysis or for utilization by

performance and security functions, allowing more effective

a network administrator for diagnostic purposes. Port mirroring

management of Extreme Networks products, solutions and third-

can also be enabled across switches in a stack.

party devices in a converged network.

LINE-RATE INGRESS AND EGRESS ACLS

Supported Protocols and Standards

ACLs are one of the most powerful components used in

A list of supported protocols and standards is available on the

controlling network resource utilization as well as in protecting

Extreme Networks website at:

the network. Summit X770 series supports up to 4,096 ingress

http://www.extremenetworks.com/go/xos

Summit X770 – Data Sheet

5

Technical Specifications*** SUMMIT X770 SERIES GENERAL SPECIFICATIONS

Depth: 3.98 Inches/10.1 cm

QUALITY OF SERVICE AND POLICIES

Weight: 0.357 lbs/0.162 kg

2560 Gbps switch bandwidth, 1904 Mpps forwarding rate (Summit X770-32q) 9216 Byte maximum packet size (Jumbo Frame) Store-and-Forward and Cut-Through switching support Less than 600 nano second latency (64-byte packet) 128 load sharing trunks, up to 8 members per trunk 4,094 VLANs (Port, Protocol, IEEE 802.1Q) 4,096 ingress and 1,024 egress ACL rules per switch FORWARDING TABLES

OPERATING SPECIFICATIONS Operating Temperature Range: 0° C to 45° C (32° F to 113° F) Operating Humidity: 10% to 95% relative humidity, non-condensing Operating Altitude: 0-3,000 meters (9,850 feet) Operational Shock (Half Sine): 30 m/s2 (3 g), 11ms, 60 Shocks Operational Random Vibration: 3-500 MHz @ 1.5g rms Storage & Transportation Conditions (Packaged) Transportation Temperature: -40° C to 70° C (-40° F to 158° F) STORAGE AND TRANSPORTATION HUMIDITY: 10% TO 95% RH, NON-CONDENSING

Layer 2/MAC Addresses: 288K IPv4 Host Addresses: 104K

Packaged Shock (Half Sine): 180 m/s2 (18 g), 6ms, 600 shocks

IPv4 LPM Entries: 16K

Packaged Sine Vibration: 5-62 Hz @ Velocity 5mm/s, 62-500 Hz @ 0.2G

IPv6 Host Addresses: 52K

Packaged Random Vibration: 5-20 Hz @ 1.0 ASD w/-3dB/oct. from 20-200 Hz

IPv6 LPM Entries: 4K CPU, MEMORY 64-bit MIPS Processor, 1GHz clock 1GB ECC SDRAM

14 drops min on sides & corners @ 42” (<15 kg box) ACOUSTIC NOISE Summit X770-32q (FB) 61.2 (LpA) Low, 70.7 (LpA) High Sound Pressure (dB(A)) Summit X770-32q (BF) 60.4 (LpA) Low, 69.8 dB(A) (LpA) High Sound Pressure (dB(A))

1GB Compact Flash

REGULATORY/SAFETY

QOS, RATE LIMITING

NORTH AMERICAN SAFETY OF ITE

2,048 ingress bandwidth meters Ingress and egress bandwidth policing/rate limiting per flow/ACL

UL 60950-1 2nd Ed, 2011-12-19, Listed Device (U.S.)

8 QoS egress queues/port

CSA 22.2 #60950-1-07 2nd Ed, 2011-12. (Canada)

Egress bandwidth rate shaping per egress queue and per port

Complies with FCC 21CFR 1040.10 (U.S. Laser Safety)

Rate Limiting Granularity: 8 Kbps – 1Mbps

CDRH Letter of Approval (U.S. FDA Approval)

LED INDICATORS

EUROPEAN SAFETY OF ITE

Per port status LED including power status

TUV-R GS Mark, EN60950-1:2006+A11+A1+A12

System Status LEDs: management, fan and power

EN 60825-1+A2:2001 (Lasers Safety)

EXTERNAL PORTS 32 port 40GBASE-X QSFP+ (10G/40G dual speed)

2006/95/EC Low Voltage Directive INTERNATIONAL SAFETY OF ITE

One RJ-45 RS-232c Serial port (control port)

CB Report & Certificate per IEC 60950-1:2005+A1, + National Differences

One 10/100/1000BASE-T out-of-band management port

BSMI, CNS14336-1 (99) (Taiwan Safety)

POWER SUPPLY SUPPORT

AS/NZS 60950-1 (Australia/New Zealand) EMI/EMC STANDARDS

Summit 550W AC PSU North America EMC for ITE

Summit 550W DC PSU PHYSICAL SPECIFICATIONS SUMMIT X770 Height: 1.73 Inches/4.4 cm

FCC CFR 47 part 15 Class A (U.S.A.) ICES-003 Class A (Canada) EUROPEAN EMC STANDARDS

Width: 17.4 Inches/44.1 cm

EN 55022:2010/AC:2011, Class A

Depth: 19.25 Inches/48.9 cm

EN 55024:2010 Class A includes IEC 61000-4-2, 3, 4, 5, 6, 11

Weight: • 16.0 lbs/7.3 kg (Summit X770-32q w/o PSU)

EN 50121-4:2006 (Railway Applications for Telecom Apparatus)

SUMMIT X670 FAN MODULE* Height: 1.65 Inches/4.2 cm Width: 1.65 Inches/4.2 cm

EN61000-6-4: 2007+A1:2011 (Emissions for Industrial Environments) EN61000-6-2: 2005 (Immunity for Industrial Environments) EN 61000-3-2:2006+A2:2009 (Harmonics) EN 61000-3-3: 2008 (Flicker) ETSI EN 300 386 v1.6.1, 2012-09 (EMC Telecommunications)

Summit X770 – Data Sheet

6

EMI/EMC STANDARDS (CONTINUED) INTERNATIONAL EMC CERTIFICATIONS

SUMMIT 550W AC PSU Physical Specifications

CISPR 22: 2010, Class A (International Emissions)

Height: 1.57 inches (4.0 cm)

CISPR 24:2010 Class A (International Immunity)

Width: 3.07 inches (7.8 cm)

IEC/EN 61000-4-2:2009 Electrostatic Discharge, 8kV Contact, 15 kV Air, Criteria A

Depth: 13.31 Inches (33.8 cm)

IEC/EN 61000-4-3:2006+A1: 2008+A2:2010, Radiated Immunity, 80-2500MHz, 5-20V/m, Criteria A

Weight 3.64 lb (1.65 kg)

IEC/EN 61000-4-4:2012 Transient Burst, 2 kV, Criteria A IEC/EN 61000-4-5:2006 Surge, 2 kV L-L, 4 kV L-G, Level 3, Criteria A IEC/EN 61000-4-6:2009 Conducted Immunity, 0.15-80 MHz, 10V/m unmod. RMS, Criteria A IEC/EN 61000-4-11:2004 Power Dips & Interruptions, >30%, 25 periods, Criteria C COUNTRY SPECIFIC

Power Specifications Voltage input range 90 to 264 V Nominal input ratings 100 to 240 V, 50 to 60 Hz, 8 A Nominal input current at full loads • 7.5 A @ 90 V (low-line) • 3.7 A @ 230 V (high-line) Line frequency range 47 to 63 Hz

VCCI:2003-04, Class A (Japan Emissions)

Maximum inrush current 15 A

ACMA -RCM Mark, AS/NZS CISPR 22:2009+A1:2010 (Australia/New Zealand Emissions)

Output 12 V, 45 A max, 540 Watts 3.3 V, 3 A max, 9.9 Watts

BSMI, CNS 13438:95-06-01 (Taiwan EMC)

Maximum continuous DC output shall not exceed 550 Watts

CQC, CCC Mark, GB4943.1-2011, GB9254-2008, YD/T993-1998 (China)

Power supply input socket IEC 320 C14

MSIP, KCC Mark EMC (Korea)

Power cord input plug IEC 320 C13

Customs Union, EAC Mark (Russia, Belarus, & Kazakhstan)

Power supply cord gauge 18 AWG (0.75 mm2) up to 6 feet or 2 meters or 16 AWG (1.0 mm2) over 6 feet

Russian FAC-CoC (Telecom)

Efficiency 84% typical at full load, high line

Belarus FAC-DoC (Telecom)

SUMMIT 550W DC PSU

TELECOM STANDARDS

Physical Specifications

EN/ETSI 300 386:v1.6.1 (2012-09) EMC Telecommunications)

Height: 1.57 inches (4.0 cm)

EN/ETSI 300 019 (Environmental for Telecommunications)

Width: 3.07 inches (7.8 cm)

MEF9 and MEF14 certified for EPL, EVPL and ELAN

Depth: 13.31 Inches (33.8 cm)

NEBS Level 3 compliant to portions of GR-1089 Issue 4 & GR-63 Issue 3 as defined in SR3580 with exception to filter requirement

Weight 2.58 lb (1.17 kg)

IEEE 802.3 MEDIA ACCESS STANDARDS

Power Specifications

IEEE 802.3ab 1000BASE-T

Nominal Input -48 to -60 VDC, 24 A

IEEE 802.3z 1000BASE-X

DC Voltage Input Range -35 to -75 V

IEEE 802.3ae 10GBASE-X

Inrush Current 21A peak

IEEE 802.3ba 40GBASE-X

Minimum wire size 14 AWG (1.5 mm2) copper stranded DC Output 12 V , 45 A/3.3 V, 3 A

ENVIRONMENTAL STANDARDS

DC Output Power (W) 550 W

EN/ETSI 300 019-2-1 v2.1.2 (2000-09) – Class 1.2 Storage EN/ETSI 300 019-2-2 v2.3.1 (2013-04) – Class 2.3 Transportation EN/ETSI 300 019-2-3 v2.3.1 (2013-04) – Class 3.1e Operational EN/ETSI 300 753 (1997-10) – Acoustic Noise ASTM D3580 Random Vibration Unpackaged 1.5G Ltd. 1-year on Hardware 90-days on Software For warranty details, visit www.extremenetworks.com/go/warranty

Power

Summit X770-32q

PSU TYPE

100% TRAFFIC WITH PASSIVE COPPER CABLES

100% TRAFFIC WITH 32 QSFP+ OPTICS

AC

199W

355W

Summit X770 – Data Sheet

7

Ordering Information PART #

PRODUCT NAME

PRODUCT DESCRIPTION

17701

Summit X770-32q-FB-AC

32 40GBASE-X QSFP+ ports (unpopulated) , ExtremeXOS Advanced Edge License, 2 Front-to-Back 550W AC power supplies, 5 Front-to-Back airflow fan modules

17702

Summit X770-32q-BF-AC

32 40GBASE-X QSFP+ ports (unpopulated) , ExtremeXOS Advanced Edge License, 2 Back-to-Front 550W AC power supplies, 5 Back-to-Front airflow fan modules

17703

Summit X770-32q-FB-DC

32 40GBASE-X QSFP+ ports (unpopulated) , ExtremeXOS Advanced Edge License, 2 Front-to-Back 550W DC power supplies, 5 Front-to-Back airflow fan modules

17704

Summit X770-32q-BF-DC

32 40GBASE-X QSFP+ ports (unpopulated) , ExtremeXOS Advanced Edge License, 2 Back-to-Front 550W DC power supplies, 5 Back-to-Front airflow fan modules

17705

Summit X770-32q-FB-MIX

32 40GBASE-X QSFP+ ports (unpopulated) , ExtremeXOS Advanced Edge License, 1 Front-to-Back 550W AC power supply, 1 Front-to-Back 550W DC power supply, 5 Front-to-Back airflow fan modules

17706

Summit X770-32q-BF-MIX

32 40GBASE-X QSFP+ ports (unpopulated) , ExtremeXOS Advanced Edge License, 1 Back-to-Front 550W AC power supply, 1 Back-to-Front 550W DC power supply, 5 Back-to-Front airflow fan modules

17725

Summit X770 Series Core License

ExtremeXOS Core License, Summit X770 Series

17726

Summit X770 MPLS Feature Pck

ExtremeXOS MPLS Feature Pack for Summit X770 series switches

11011

Direct Attach Feature Pack

Direct Attach Feature Pack for Summit X450a/X460/X480, X650, X670, X770 and BlackDiamond 8800, X Series

17729

Summit X770 Timing 1588 PTP

ExtremeXOS Network Timing Feature Pack for Summit X770 - enables 1588v2 PTP (Precision Time Protocol)

10925*

Summit 550W AC PSU FB

550W AC Power Supply module for Summit switches, Front-to-Back airflow

10926*

Summit 550W DC PSU FB

550W DC Power Supply module for Summit switches, Front-to-Back airflow

10927*

Summit 550W AC PSU BF

550W AC Power Supply module for Summit switches, Back-to-Front airflow

10928*

Summit 550W DC PSU BF

550W DC Power Supply module for Summit switches, Back-to-Front airflow

17111*

Summit X670 fan module FB

Fan module for Summit X670 series switches, Front-to-Back airflow, spare

17112*

Summit X670 fan module BF

Fan module for Summit X670 series switches, Back-to-Front airflow, spare

10311

0.5m QSFP+ Passive Copper Cable

40 Gigabit Ethernet QSFP+ passive copper cable assembly, 0.5m length

10312

1m QSFP+ Passive Copper Cable

40 Gigabit Ethernet QSFP+ passive copper cable assembly, 1m length

10313A**

3m QSFP+ Passive Copper Cable

40 Gigabit Ethernet QSFP+ passive copper cable assembly, 26 AWG, 3m length

10202

1m QSFP+ to 4xSFP+ fanout,26 AWG

QSFP+ to 4 x SFP+ fan-out copper cable, 26 AWG, 1m length.

10203

2m QSFP+ to 4xSFP+ fanout,26 AWG

QSFP+ to 4 x SFP+ fan-out copper cable, 26 AWG, 2m length.

10315

10m QSFP+ Active Optical Cable

40 Gigabit Ethernet QSFP+ active optical cable assembly, 10m length

10316

20m QSFP+ Active Optical Cable

40 Gigabit Ethernet QSFP+ active optical cable assembly, 20m length

10318

100m QSFP+ Active Optical Cable

40 Gigabit Ethernet QSFP+ active optical cable assembly, 100m length

10319

QSFP+ SR4 module

40 Gigabit Ethernet QSFP+ SR4 optical module, MPO connector, 100m link length

10320

QSFP+ 40GBASE-LR4

40 Gigabit Ethernet QSFP+ LR4 optical module, LC connectors, 10km SMF link length

POWER CORDS In support of the Extreme Networks Green initiatives, power cords can be ordered separately but need to be specified at the time order. Please refer to www. extremenetworks.com/product/powercords/ for details on power cord availability for this product..

* Fans and Power Supplies are common between X670 and X770 models **This cable has thicker gauge copper than the previous 10313 number and is required on the Summit X770 *** EXCEPT FOR THE SECTION TITLED “TECHNICAL SPECIFICATIONS” EXTREME NETWORKS MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO ANY OTHER DATA CONTAINED IN THIS DATA SHEET INCLUDING ANY (A) WARRANTY OF MERCHANTABILITY; OR (B) WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE;WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE.

http://www.ExtremeNetworks.com/contact

Phone +1-408-579-2800

©2014 Extreme Networks, Inc. All rights reserved. Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in the United States and/or other countries. All other names are the property of their respective owners. For additional information on Extreme Networks Trademarks please see http://www.extremenetworks.com/about-extreme/trademarks.aspx. Specifications and product availability are subject to change without notice. 1945-0614

WWW.EXTREMENETWORKS.COM

Summit X770 – Data Sheet

8