GAMBAR 8656 7099

mitigation system for use with a multi-fuel energy efficient green engine 101,000 2014 - 2016 Putra Grant - IPB 3. Development of finite element model...

0 downloads 2 Views 408KB Size


Dr. Zamir Aimaduddin Zulkefli Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor T: 03-8946 4378 F: 03-8656 7099 E:[email protected]

1. 2. 3. 4.

Education MBA in Strategy and Marketing, 2017, University of Cambridge, United Kingdom PhD in Mechanical Engineering, 2013, Case Western Reserve University, United States MSc in Aerospace Engineering, 2005, Boston University, United States BSc in Aerospace Engineering, 2005, Boston University, United States Areas of Interest

1. Acoustic and vibration 2. Research commercialization 3. Financial modeling

1. 2. 3. 4.

Professional Qualification/ Membership/ Affiliation Member, American Society of Mechanical Engineers (ASME) Member, American Institute of Aeronautics and Astronautics (AIAA) Member, Society of Automotive Engineers (SAE) Graduate Member, Board of Engineers Malaysia (BEM)

Appointments Position 1. [email protected] 2.0 Cycle 1 Fellow, Ministry of Higher Education, Malaysia 2. Academic Coordinator, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, UPM 3. Lab Coordinator-Dynamics and Machinery Lab, Department of Mechanical and Manufacturing Engineering, UPM 4. Summer Fellow, Center for Space Nuclear Research, Idaho National Lab, USA 5. Lab Coordinator-Engineering Controls Lab, Department of Mechanical and Manufacturing Engineering, UPM 6. Quality Officer, Department of Mechanical and Manufacturing Engineering, UPM

Duration September 2017 – February 2018 January 2014 – September 2015 January 2013 – September 2015 June 2012 – August 2012 January 2006 – December 2007 January 2007 – August 2008

Publications Journals (30 recent journals) 1. T. Seperamaniam, NAA Jalil and ZA Zulkefli; Hydrostatic Bearing Design Selection for Automotive Application Using Pugh Controlled Convergence Method; Procedia Engineering, Vol 170, pp. 422-429, 2017. 2. KAM Rezali, A As’arry, ZA Zulkefli, R Samin and NAA Jalil; Predicting the Transmissibility of a Glove Material to the Palm Using a Simple Lumped Parameter Model of the Hand and Glove; Jurnal Teknologi, Vol 68(6-10), pp17-22, 2016. 3. ZA Zulkefli and ML Adams; Mitigation of Gear Mesh-Frequency Noise Using a Hydrostatic Bearing; Journal of Vibration and Acoustics, Vol 137(3), June 2015.

Updated on…………………………

4. AH Abdullah and ZA Zulkefli; A study of the Acoustics and Speech Intelligibility Quality of Mosques in Malaysia; Applied Mechanics and Materials, Vol 564, July 2014. 5. ST Cheng, NA Jalil and ZA Zulkefli; Identification of Corrosion on a Hollow Tube Using Vibration; Applied Mechanics and Materials, Vol 564, July 2014. 6. Zamir Zulkefli and Maurice Adams; Experimental Investigation of the Low Pass Filtering Effect of a Hydrostatic Bearing; SAE Technical Paper, 2014-01-1758, April 2014. 7. Aidy Ali, Tun Chun Yung, Z. A. Zulkefli, Nuraini Abdul Aziz, B.B. Sahari, and M. Zadeh; Strength Investigation of Thick Welded T-Joint using Finite Element Modelling; Defence Science Journal, Vol. 60, No. 1, January 2010, pp. 112-118. 8. Z. Zulkefli; Experimental Study of Surface Effects on the Resonance of an Acoustically Driven Bubble in Xanthan Gel; International Journal of Engineering and Technology; 2006, Vol. 3, No. 1, pp 107-114. Conference Proceedings (30 recent Conference Proceedings) 1. T. Seperamaniam, Nawal A. Abdul Jalil, Zamir A. Zulkefli, and A. As’arry; Effect of Hydrostatic Bearing on Rotor Vibration; Inter Noise 2017, Hong Kong Special Administrative Region, August 2017. 2. Cheryl Blomberg, Zamir Zulkefli, Spencer Rich, and Steven Howe; Study on Alternative Cargo Launch Options from the Lunar Surface; 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit and 11th International Energy Conversion Engineering Conference; San Jose, California, USA; July 2013. 3. C. Blomberg, Z. Zulkefli, S. Rich, C. Fisk, A. Perez, T. Hale and S. Howe; Electromagnetic Launcher to Mars; Advanced Space Propulsion Workshop; Huntsville, Alabama, USA; November 2012. 4. Z. Zulkefli and H.L. Ng; Characterization of a Unimorph Piezoelectric Actuator Used in Parasitic Power Harvesting System to Applied Mechanical Loads; Proceedings of the World Engineering Congress; Kuala Lumpur, Malaysia, 5-9th August 2007, pp 356-361. Books (If any) Chapter in Books (If any)

Research Grants No

Project Title


Development of light weight metamaterial based acoustic panel for reduction of low frequency vehicle noise Modeling the frequency response of a hydrostatic bearing centered gear meash-frequency noise mitigation system for use with a multi-fuel energy efficient green engine Development of finite element model of a Thin Layer Unimorph Ferroelectric Driver Investigating the response of a single acoustically driven bubble near a rigid surface in a polymer gel


3. 4.

Amount (RM) 50,000

Year 2018 2020

Source of Fund Putra Grant


2014 2016

Putra Grant IPB




2007 2009

Putra Grant SPB FRGS

Awards/Recognition (Current) Num

Name of awards


Award Authority

Award Type


Updated on…………………………

Professional Services/Consultation No





Student Supervision PhD (Main Supervisor) No. Name 1. Thandayuthapani A/L Seperamaniam (GS42118)

Title Development of a hydrostatic-bearing based vibration reduction system

MS with thesis (Main Supervisor) No. Name Title

Status Ongoing


MS without Thesis (Main Supervisor) No. Name Title 1. Gan Soon Kai Flow induced vibration in corrugated pipe and t(2014/2015) pipe 2. Azzam Mohammad The potential profitability of feed-in tariff (FIT) for Khalefeh Ababneh solar photovoltaic (PV) system for Malaysian householder

Status Graduated Graduated

Updated on…………………………