Green Procurement

The following shows environmental load substances ... 13b.Lead in filter glasses and glasses used for reflectance ... insect traps, photochemical and ...

0 downloads 54 Views 217KB Size
December 2010 Nagano Japan Radio Co., Ltd.

Green Procurement - Environmental Load Substance List

(ver 2.0)

□ The following shows environmental load substances which are specified in the NJRC "Green Procurement Guideline 9th Edition". □ The content in this list will become effective on January 1, 2011. □ This complies with those that are specified by Joint Industry Guide (JIG). Refer to JIG-101 Ed 3.1 for the example of substances.   → http://210.254.215.73/jeita_eps/green/green7.htm □ Although the substance, the application or the acceptable level is not specified in this list, we should internal or external laws and regulations when restricted. < Example of laws and regulations, but not limited to the following > ・

Act on the Evaluation of Chemical Substances and Regulation of Their Manufacture, etc (Kashinho) - The first class and the second class specific chemical substances Industrial Safety and Health Act - Substances banned on production Poisonous Material Control Law - Specific poisonous substances Montreal Protocol on Substances that Deplete the Ozone Layer - Substances specified in Appendix A, B, C and E

・ ・ ・

(1)Prohibited Substances JIG-101 Ed 3.1

Allowable concentration Name of substance(s)

1

1-R

Cadmium / Cadmium compounds

2

1-R

Chromium Ⅵ compounds

3

1-R

Lead / Lead compounds

4

1-R

5

1-R

6

1-R

Lead chromate Lead chromate molybdate sulphate red (C.I. Pigment Red 104) Lead sulfochromate yellow (C.I. Pigment Yellow 34)

7

1-R

Mercury / Mercury compounds

8

1-R

Tributyl tin oxide (TBTO) Tri-substiituted organostannic compounds Polybrominated biphenyls (PBBs) Polybrominated diphenylethers (PBDEs) Polychlorinated biphenyls (PCBs) and specific substitutes Polychlorinated terphenyls (PCTs) Polychlorinated naphthalenes (more than 3chlorine atoms) Shortchain chlorinated paraffins (C10-C13) Asbestos Azocolourants and azodyes which form certain aromatic amines

* = in homogeneous material ** = in product……………//…./

100ppm * 100ppm * Packaging ※ 1000ppm * 100ppm * Packaging ※ 1000ppm * 300ppm * Power cable 100ppm * Packaging ※ 1000ppm ** 1000ppm ** 1000ppm ** Intentionally added or 1000ppm * 100ppm * Packaging ※ Intentionally added or 1000ppm ** 1000ppm * 1000ppm * 1000ppm * Intentionally added Intentionally added Intentionally added 1000ppm ** Intentionally added

9

1-R

10

1-R

11

1-R

12

1-R

13

1-R

14

1-R

15

1-R

16

1-R

17

1-R

18

1-R

Ozone depleting substances

Intentionally added

19

1-R

Perfluorooctane sulfonate (PFOS)

Intentionally added

20

1-R

21

1-R

22

1-R

Fluorinated greenhouse gases (PFC, SF6, HFC) Phenol, 2-(2H-benzotriazol-2-yl)-4,6-bis(1,1-dimethylethyl) Dimethyl fumarate

Intentionally added Intentionally added 0.1ppm *

(limited to surface that directly contact with skins for a long time)

30ppm **

Exception of application See appendix Table-1 See appendix Table-1 See appendix Table-1 - - - See appendix Table-1 - - - - - - - - - - - See appendix Table-1 - - -

※ Packaging components and materials that the total allowable concentration of Cd, Cr+, Pb and Hg should be 100ppm or less.

1/4

(2) Controlled Substances Allowable concentration

JIG-101 Ed 3.1

Name of substance(s)

1

1-R

2

3-I

3

3-I

4

1-R

5

1-R

6

1-R

7

1-R

8

1-R

9

1-R

Nickel (limited to surface that directly contact with skins for a long time) Polyvinyl chloride (PVC) Brominated flame retardants (other than PBBs, PBDEs, or HBCDD) Bis (2-ethylhexyl) phthalate (DEHP) Dibutyl phthalate (DBP) Benzyl butyl phthalate (BBP) Diisobutyl phthalate (DIBP) Phthalates (DIDP, DINP, DNOP) Radioactive substances

10

1-R

Formaldehyde

11

1-R

12

1-R

13

1-R

14

1-R

15

1-R

16

1-R

17

1-R

Dibutyltin(DBT)compounds Dioctyltin(DOT)compounds Diarsenic pentoxide Diarsenic trioxide Hexabromocyclododecane (HBCDD) Perchlorates Tris (2-chloroethyl) phosphate (TCEP) Beryllium oxide (BeO) Refractory Ceramic Fibres, Aluminosilicate Refractory Ceramic Fibres, Zirconia Aluminosilicate Cobalt dichloride (CoCl2) Boric acid Disodium tetraborate, anhydrous Tetraboron disodium heptaoxide, hydrate REACH Regulation - Substance of Very High Concern (SVHC)

18

3-I

19

1-R

20

1-R

21

1-R

22

1-R

23

1-R

24

1-R

25



※ Except as specified in this list

□ The version of the survey tool corresponding with this list is as follows:

■ AIS Form: ver 3.1a or later Substance List: ver 2.030 or later ■ Certificate of Nonuse of Hazardous Substances Form: ver 3.0 or later

2/4

* = in homogeneous material ** = in product……………//…./

Intentionally added 1000ppm ** 1000ppm ** plastic material 900ppm ** PWB laminate 1000ppm ** 1000ppm ** 1000ppm ** 1000ppm ** 1000ppm * (in total) Intentionally added Intentionally added or 75ppm ** 1000ppm * 1000ppm * 1000ppm ** 1000ppm ** 1000ppm ** 0.006ppm ** 1000ppm ** 1000ppm ** 1000ppm ** 1000ppm ** 1000ppm ** 1000ppm ** 1000ppm ** 1000ppm ** 1000ppm **

Exception of application - - - - - - - - - - - - - - - - - - - - - - - - -

Appendix Table - 1 Exempted Applications Substances

Mercury

Lead

Application or concentration to be exempted 1. Mercury in single capped (compact) fluorescent lamps not exceeding (per burner) (a) For general lighting purposes < 30W 5mg expires on 31 December 2011 3.5mg may be used after 31 December 2011 until 31 December 2012 2.5mg shall be used after 31 December 2012 (b) For general lighting purposes >= 30W and < 50W 5mg expires on 31 December 2011 3.5mg may be used after 31 December 2011 (c) For general lighting purposes >= 50W and < 150W 5mg (d) For general lighting purposes >= 150W 15mg (e) For general lighting purposes with circular or square structural shape and tube diameter <=17mm No limitation of use until 31 December 2011 7mg may be used after 31 December 2011 (f) For special purposes 5mg 2a. Mercury in double-capped linear fluorescent lamps for general lighting purposes not exceeding (per lamp)   (1) Tri-band phosphor with normal lifetime and a tube diameter < 9mm (e.g. T2) 5mg expires on 31 December 2011 4mg may be used after 31 December 2011   (2) Tri-band phosphor with normal lifetime and a tube diameter >= 9mm and <= 17mm (e.g. T5) 5mg expires on 31 December 2011 3mg may be used after 31 December 2011   (3) Tri-band phosphor with normal lifetime and a tube diameter > 17mm and <=28mm (e.g. T8) 5mg expires on 31 December 2011 3.5mg may be used after 31 December 2011   (4) Tri-band phosphor with normal lifetime and a tube diameter > 28mm (e.g. T12) 5mg expires on 31 December 2012 3.5mg may be used after 31 December 2012   (5) Tri-band phosphor with long lifetime (> 25,000h) 8mg expires on 31 December 2011 = 5mg may be used after 31 December 2011 2b. Mercury in other fluorescent lamps not exceeding (per lamp)   (1) Linear halophosphate lamps with tube > 28mm (e.g. T10 and T12) 10mg expires on 13 April 2012   (2) Non-linear halophosphate lamps (all diameters) 15mg expires on 13 April 2016   (3) Non-linear tri-band phosphor lamps with tube diameter > 17mm (e.g.T9) No limitation of use until 31 December 2011 15mg may be used after 31 December 2011   (4) Lamps for other general lighting and special purposes (e.g. induction lamps) No limitation of use until 31 December 2011 15mg may be used after 31 December 2011 3. Mercury in Cold Cathode Fluorescent Lamps and External Electrode Fluorescent Lamps (CCFL and EEFL) for special purposes not exceeding (per lamp)   (a) Short length (<= 500mm) No limitation of use until 31 December 2011 3.5mg may be used after 31 December 2011   (b) Medium length (> 500mm and <=1500mm) No limitation of use until 31 December 2011 5mg may be used after 31 December 2011   (c) Long length (> 1500mm) No limitation of use until 31 December 2011 13mg may be used after 31 December 2011 4a. Mercury in other low pressure discharge lamps (per lamp) No limitation of use until 31 December 2011 15mg may be used after 31 December 2011 4b. Mercury in High Pressure Sodium (vapour) lamps for general lighting purposes not exceeding (per burner) in lamps with improved colour rendering index Ra > 60 No limitation of use until 31 December 2011   (Ⅰ) P <= 155W 30mg may be used after 31 December 2011 No limitation of use until 31 December 2011   (Ⅱ) 155W < P <= 405W 40mg may be used after 31 December 2011 No limitation of use until 31 December 2011   (Ⅲ) P > 405W 40mg may be used after 31 December 2011 4c. Mercury in other High Pressure Sodium (vapour) lamps for general lighting purposes not exceeding (per burner) No limitation of use until 31 December 2011   (Ⅰ) P <= 155W 25mg may be used after 31 December 2011 No limitation of use until 31 December 2011   (Ⅱ) 155W < P <= 405W 30mg may be used after 31 December 2011 No limitation of use until 31 December 2011   (Ⅲ) P > 405W 40mg may be used after 31 December 2011 4d. Mercury in High Pressure Mercury (vapour) lamps (HPMV) Expires on 13 April 2015 4e. Mercury in Metal Halide lamps (MH) 4f. Mercury in other discharge lamps for special purposes not specifically mentioned in this Annex 36. -Delete- 5a. Lead in glass of cathode ray tubes 5b. Lead in glass of fluorescent tubes not exceeding 0.2 % by weight 6a. Lead as an alloying element in steel for machining purposes and in galvanized steel containing up to 0.35% lead by weight 6b. Lead as an alloying element in aluminium containing up to 0.4% lead by weight 6c. Copper alloy containing up to 4% lead by weight 7a. Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead) 7b. Lead in solders for servers, storage and storage array systems, network infrastructure equipment for switching, signalling, transmission, and network management for telecommunications 7c. (Ⅰ) Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound 7c. (Ⅱ) Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC or higher 7c. (Ⅲ) Lead in dielectric ceramic in capacitors for a rated voltage of less than 125V AC or 250V DC Expires on 1 January 2013 and after that date may be used in spare parts for EEE placed on the market before 1 January 2013 9b. Lead in bearing shells and bushes for refrigerant-containing compressors for Heating, Ventilation, Air Conditioning and Refrigeration (HVACR) applications

3/4

Appendix Table - 1 Exempted Applications Substances

Application or concentration to be exempted 11a.-Delete- 11b.Lead used in other than C-press compliant pin connector systems Expires on 1 January 2013 and after that date may be used in spare parts for EEE placed on the market before 1 January 2013 12. -Delete- 13a.Lead in white glasses used for optical applications 13b.Lead in filter glasses and glasses used for reflectance standards 14. Lead in solders consisting of more than two elements for the connection between the pins and the package of microprocessors with a lead content of more than 80% and less than 85% by weight Expires on 1 January 2011 and after that date may be used in spare parts for EEE placed on the market before 1 January 2011 15. Lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit Flip Chip packages 16. Lead in linear incandescent lamps with silicate coated tubes Expires on 1 September 2013 17. Lead halide as radiant agent in High Intensity Discharge (HID) lamps used for professional reprography applications 18a.Lead as activator in the fluorescent powder (1% lead by weight or less) of discharge lamps when used as speciality lamps for diazoprinting reprography, lithography, insect traps, photochemical and curing processes containing phosphors such as SMS ((Sr,Ba) 2MgSi2O7:Pb) Expires on 1 January 2011 18b.Lead as activator in the fluorescent powder (1% lead by weight or less) of discharge lamps when used as sun tanning lamps Lead containing phosphors such as BSP (BaSi 2O5:Pb) 19. Lead with PbBiSn-Hg and PbInSn-Hg in specific compositions as main amalgam and with PbSn-Hg as auxiliary amalgam in very compact Energy Saving Lamps (ESL) Expires on 1 June 2011 20. Lead oxide in glass used for bonding front and rear substrates of flat fluorescent lamps used for Liquid Crystal Displays (LCDs) Expires on 1 June 2011 21. Lead in printing inks for the application of enamels on glasses, such as borosilicate and soda lime glasses 22. -Delete- 23. -Delete- 24. Lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors 25. Lead oxide in Surface conduction Electron emitter Displays (SED) used in structural elements, notably in the seal frit and frit ring 26. Lead oxide in the glass envelope of Black Light Blue (BLB) lamps Expires on 1 June 2011 27. -Delete- 29. Lead bound in crystal glass as defined in Annex I (Categories1, 2, 3 and 4) of Council Directive 69/493/EEC 31. Lead in soldering materials in mercury free flat fluorescent lamps (which e.g. are used for LCDs, design or industrial lighting ) 32. Lead oxide in seal frit used for making window assemblies for Argon and Krypton laser tubes 33. Lead in solders for the soldering of thin copper wires of 100μm diameter and less in power transformers 34. Lead in cermet-based trimmer potentiometer elements 37. Lead in the plating layer of high voltage diodes on the basis of a zinc borate glass body 8a. Cadmium and its compounds in one shot pellet type thermal cut-offs Expires on 1 January 2012 and after that date may be used in spare parts for EEE placed on the market before 1 January 2012 8b. Cadmium and its compounds in electrical contacts 13b.Cadmium in filter glasses and glasses used for reflectance standards 21. Cadmium in printing inks for the application of enamels on glasses, such as borosilicate and soda lime glasses Cadmium 30. Cadmium alloys as electrical / mechanical solder joints to electrical conductors located directly on the voice coil in transducers used in high-powered loudspeakers with sound pressure levels of 100dB (A) and more 35. -Delete- 38. Cadmium and cadmium oxide in thick film pastes used on aluminium bonded beryllium oxide 39. Cadmium in colour converting II-VI LEDs (<10μg Cd per mm2 of light-emitting area) for use in solid state illumination or display systems Expires on 1 July 2014 9. Hexavalent chromium as an anticorrosion agent of the carbon steel cooling system in absorption refrigerators up to 0.75 % Hexavalent chromium by weight in the cooling solution 28. -Delete- PBDE 9a. -Delete- Perfluorooctane sulfonates a. Photo resist or antireflective coating agent for photolithography process (PFOS) b. Photographic coating agent for films, papers or plates < Note > Though this list was created in accordance with the Official Journal of European Union "2010/571/EU" issued on September 2010, the content does not provide any guarantees against the conformity with it. Please refer to the original for the latest information.

4/4