IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PSDC EMC LABORATORY 1, Jalan Sultan Azlan Shah Bandar Bayan Baru, 11900 Bayan Lepas ... C., Section 1 of ...

0 downloads 17 Views 148KB Size
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PSDC EMC LABORATORY 1, Jalan Sultan Azlan Shah Bandar Bayan Baru, 11900 Bayan Lepas Penang, Malaysia Goh Jia Haw (Authorized Representative) Phone: +604-6437909 Ext 536 Email: [email protected] Lim Wei Chen (Deputy Authorized Representative) Phone: +604-6437909 Ext 532 Email: [email protected] ELECTRICAL (EMC) Valid To: March 31, 2018

Certificate Number: 3185.01

In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following electromagnetic compatibility tests: Test(s): Emissions Radiated Emissions

Test Method(s) 1: CISPR 11:2003 + A1:2004 + A2:2006; CISPR 11:2009 + A1:2010; CISPR 16-2-3:2010 + A1:2010 (Limited to clauses 7.3 and 7.6); CISPR 22:2005 + A1:2005; CISPR 22:2008; EN 55011:2007 + A2:2007 (Limited to Group 1, Class A and B); EN 55011:2009 + A1:2010 (Limited to Group 1, Class A and B); EN 55022:2006 + A1:2007; EN 55022:2010; CISPR 32:2015; EN 55032:2015

Conducted Emissions

CISPR 11:2003 + A1:2004 + A2:2006; CISPR 11:2009 + A1:2010; CISPR 22:2005 + A1:2005; CISPR 22:2008; EN 55011:2007 + A2:2007 (Limited to Group 1, Class A and B); EN 55011:2009 + A1:2010 (Limited to Group 1, Class A and B); EN 55022:2006 + A1:2007; EN 55022:2010

Harmonic Current Emission

IEC 61000-3-2:2005 + A1:2008 + A2:2009; EN 61000-3-2:2006 + A2:2009

Voltage Changes, Voltage Fluctuations and Flicker

IEC 61000-3-3:2008; EN 61000-3-3:2008

(A2LA Cert. No. 3185.01) 04/15/2016

Page 1 of 3

Test(s): Emissions (cont.) EMC Requirements for Electrical Equipment for Portable Test, Measuring and Monitoring Equipment Used in Low-Voltage Distribution Systems

Test Method(s) 1: EN 61326-1:2006; EN 61326-1:2013; EN 61326-2-1:2006; EN 61326-2-1:2013; EN 61326-2-2:2006; EN 61326-2-2:2013; EN 61326-2-6:2013; IEC 61326-1:2005; IEC 61326-1:2012; IEC 61326-2-1:2005; IEC 61326-2-1:2012; IEC 61326-2-2:2005; IEC 61326-2-2:2012; IEC 61326-2-6:2012

Land Mobile Service

EN 300 086-1 v1.4.1 (Limited to clauses 7.3, 7.6, 8.8); EN 300 086-2 v1.3.1 (Limited to clauses 4.2.3, 4.2.5, 4.3.7); EN 300 394-1 v2.3.1 (Limited to clauses 7.1.6, 7.2.9, 8.6, 9.9); EN 303 035-1 v1.2.1; EN 303 035-2 v1.2.2

Licensed Transmitters

47 CFR, FCC Part 90 [Using ANSI/TIA-603-C-2004 (clause 2.2.12)]

Immunity Testing Electrostatic Discharge (ESD)

EN 61000-4-2:1995 + A1:1998 + A2:2001; EN 61000-4-2:2009; IEC 61000-4-2:2001; IEC 61000-4-2:2008

Radiated, Radio Frequency, Electromagnetic Field Immunity Test

EN 61000-4-3:2002 + A1:2002; EN 61000-4-3:2006 + A1:2008 + A2:2010; IEC 61000-4-3:2002 + A1:2002; IEC 61000-4-3:2006 + A1:2007 + A2:2010

Electrical Fast Transient/Burst Immunity Test

EN 61000-4-4:2004; EN 61000-4-4:2004 + A1:2010; EN 61000-4-4:2012; IEC 61000-4-4:2004; IEC 61000-4-4:2004 + A1:2010; IEC 61000-4-4:2012

Surge Immunity Test

EN 61000-4-5:1995 + A1:2001; EN 61000-4-5:2006; IEC 61000-4-5:1995 + A1:2000; IEC 61000-4-5:2005

Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields

EN 61000-4-6:2005; EN 61000-4-6:2009; IEC 61000-4-6:2003 + A1:2004 + A2:2006; IEC 61000-4-6:2008

(A2LA Cert. No. 3185.01) 04/15/2016

Page 2 of 3

Test(s): Immunity Testing(cont.) Power Frequency Magnetic Field Immunity Test

Test Method(s) 1: EN 61000-4-8: 2010; IEC 61000-4-8:2009

Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

EN 61000-4-11:2004; IEC 61000-4-11:2004

Absorber-Lined Shielded Enclosure (ALSE)

ISO 11452-2:2004

Bulk Current Injection (BCI) Substitution Method

ISO 11452-4: 2005

Transients and Surges in the Vehicular Environment

ISO 7637-2:2004

Product Standards, Immunity Testing for Land Mobile Radios

EN 301 489-1 v1.8.1 (except 8.5 and 8.6); EN 301 489-1 v1.9.2 (except 8.5 and 8.6); EN 301 489-5 v1.3.1; EN 301 489-18 v1.3.1 CISPR 24:2010; EN 55024:2010

Product Standards, Immunity Testing for Information Technology Equipment 1

When the date, revision or edition of a test method standard is not identified on the scope of accreditation, the laboratory is required to be using the current version within one year of the date of publication, per part C., Section 1 of the R101 - General Requirements - Accreditation of ISO-IEC 17025 Laboratories.

(A2LA Cert. No. 3185.01) 04/15/2016

Page 3 of 3

Accredited Laboratory A2LA has accredited

PSDC EMC LABORATORY Bayan Lepas, Penang, Malaysia for technical competence in the field of

Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009).

Presented this 15th day of April 2016.

_______________________ Senior Director of Quality and Communications For the Accreditation Council Certificate Number 3185.01 Valid to March 31, 2018

For the tests to which this accreditation applies, please refer to the laboratory’s Electrical Scope of Accreditation.