OK NG NG

5.Unlock Lever and Removing FPC Pic. ⑦ Correct Insertion Pic. ⑨ Pic. ⑪ Pic. ⑫ Pic. ⑬ Pic. ⑧ Diagonal Insertion Pic. ⑩ OK NG OK OK NG OK NG ※ (Excludin...

0 downloads 93 Views 194KB Size
FF □□  Series

○ Connector Operation and Note Lock lever is opened, delivered.

1.Lock Lever Connectors are delivered with lock lever opened. You need not operate the lock lever before inserting FPC.                      (Refer to Pic. ①)

Caution  Please do not close a lock lever without inserting FPC.  Otherwise, contact gap will become narrow and  FPC insertion force will be higher.

2.Insert FPC

Pic. ①

・When using the upper contact, please insert FPC pattern side up. When using the lower contact,  please insert FPC supporting tape side up.( Upper Contact:Pic. ② , Lower Contact:Pic. ③) ・Please insert FPC straight in the connector husing. ・ Contacts have a semi-retaining mechanism. You need some insertion force when inserting FPC. ・Please confirm FPC is inserted into the end of mating part fully. Supporting Tape

Pattern Side

Pic. ② Upper Contact

Pic. ③ Lower Contact

3-1.FPC Correct Connection(Upper Contact) Please confirm FPC pattern line is parallel to the connector housing. It makes sure collect insertion to prevent short and diagonal insertion problem.( Pic. ④ , Pic. ⑤ , Pic. ⑥)

20110927

OK

NG

NG

Pic. ④ Correct Insertion

Pic. ⑤ Short Insertion

Pic. ⑥ Diagonal Insertion

◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated.

http://www.ddknet.co.jp

FF □□ Series

○ Method of Operating and Note

3-2.FPC Correct Insertion(Lower Contact) ※ (Excluding FF18 and FF20 Series)

Please confirm FPC supporting tape line is parallel to the connector housing. It makes sure collect insertion to prevent slanted insertion problem. Also you can confirm the short insertion if making the same line like as FPC pattern line on the supporting tape face.

OK

NG

Pic. ⑧ Diagonal Insertion

Pic. ⑦ Correct Insertion

4.Lock Lever Please rotate down the lock lever. (Pic. ⑨ )  Please be careful to not press with excessive force on the housing. (Pic. ⑩ )

OK

NG

Pic. ⑩

Pic. ⑨

5.Unlock Lever and Removing FPC Please flip and lift up the lock lever in arrow direction and withdraw FPC carefully.(Pic. ⑪ , ⑫) Please do not lift up with excessive force on the housing. (Pic. ⑬)

OK

OK

Pic. ⑪

Pic. ⑫

◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated.

http://www.ddknet.co.jp

NG

Pic. ⑬