Release Date: 2019 – 02 – 08
Instruction Manual High-Definition Link for BMW
IW06B-N23
Model Name
IW06B-N23
Latest Firmware Date
2019 – 01 - 29
Manual Version
Rev. 2.7
Language
English
Contents • • • • • • • • • • • • • •
Cautions _____________________________________________________________ 3 Dimension & Exterior _________________________________________________ 4 Components & Optional parts _________________________________________ 5 Full Installation Diagram ______________________________________________ 6 HDMI Connection Diagram ____________________________________________ 7 Navigation Connection Diagram _______________________________________ 8 Compatibility Chart for Navigation(GPS) box models_____________________ 9 LVDS Connection Diagram ___________________________________________ 10 Hazard Module Connection___________________________________________ 11 Body Connector specifications________________________________________ 12 Car Compatibility Chart ______________________________________________ 13 Activation by original buttons of BMW_________________________________ 14 DIP Switch Settings__________________________________________________ 15 Settings 1. Enter into the setting menu_____________________________________ 17 2. HDMI mode settings____________________________________________ 18 3. NAVI mode settings_____________________________________________ 18 4. Rear view camera settings______________________________________ 19 5. AV1(Front view camera) settings_________________________________ 19 6. Automatic activation function(AV1)______________________________ 20 7. AV2 settings___________________________________________________ 20 8. Keep the rear camera view _____________________________________ 21 9. System settings________________________________________________ 22 10. System information ____________________________________________ 22 11. Information of Dip switch settings_______________________________ 23
Cautions IW06B-N23-related • You should check the names and colors of each wires exactly, before you connect the wires. ex) CAN HIGH: White wires / CAN LOW: Blue wires
•
The ‘POWER / CAN Cable’ should always be connected last and be disconnected first.
•
The 'Mode Switch' is an optional part to change modes forcibly without CAN-BUS. Generally, the CAN-BUS wires are connected for changing modes by original buttons.
•
When the reverse gear is not detected by CAN-BUS, the 'REVERSE 12V IN wire’ should be spliced with 12V power of reverse light.
HDMI device-related • HDMI mode accepts general-screen resolution of HDMI devices. •
Generally, '5V 1A Power output(5V USB POWER)' is a standard voltage for charging smartphone. If you need higher voltage than 5V, you should add a separate power supply.
Navigation(GPS) box-related • When you connect the power wires(B+, ACC) to the navigation(GPS) box, the ‘NAVI (12V) OUT' wire supported by IW06B-N23 should be spliced with an ACC wire of navigation box. •
After installation is done, select an applicable navigation(GPS) box model in the 'Navigation model selection menu' of setting mode.
•
The navigation box should be powered off before unplugging the HDMI cable. 3
Dimension
ⓐ
ⓑ
ⓒ ⓓ
ⓔ
Exterior
ⓐ DIP SWITCH ⓑ AV IN / OUT ⓒ TOUCH IN (Not Used) ⓓ MODE ⓔ POWER / CAN ⓕ HDMI IN ⓖ 5V USB POWER ⓗ NAVI IN ⓘ UART I/F ⓙ LVDS OUT
ⓕ
ⓖ
ⓗ
ⓘ
ⓙ
4
Components
Power / CAN Cable
LVDS Cable
LVDS PCB
HDMI Cable
AV IN / OUT Cable
5-pin Micro USB Cable
(For LVDS)
Optional Parts(sold separately at the indiwork)
HDMI Cable
HDMI Extender
(Male to Male)
(For stick type HDMI device)
Mode Switch
5
Full Installation Diagram
※ CAN HIGH / LOW Pin Specification
NAVI 12V Power Output 네비게이션용 12V 전원 출력 (ACC 12V 12V OUT) OUT) (NAVI
※ Optional External Devices
1
5
4
8
GND Output(GROUND) 내비게이션 전원 접지(GROUND)
Mode Switch (optional)
9
13
11
15
12
16
RV-CAM Video Input External Rear View Camera
12V Power Output & GND Output(RV-CAM Power) Reverse Signal Detection(optional) Head Unit – Original Main Harness Pin # 9 = CAN LOW(Yellow / Brown) “ (Purple)*MINI Cooper Pin # 11 = CAN HIGH(Yellow / Red) “ (White)*MINI Cooper
DIP S/W Setting
Audio(AUX) Output of Navigation Box
NAVI Audio Input Pin # 12 = GND(Brown) Pin # 15 = Head Unit Power(Red / Yellow)
Audio Output Auxiliary(AUX) Input of the car OEM Monitor HDMI
External Front View Camera
USB
HDMI
USB
HDMI
FV-CAM Video Input (AV1) HDMI
HDMI
USB
(Provided LVDS Cable)
OEM Head Unit
AV device (ex: DTV Box, Divx)
HDMI
(OEM LVDS Cable)
AV-Input(AV2)
HDMI Device
Navigation Box
LVDS IN / OUT PCB
LVDS IN / OUT Connection
6
HDMI Connection Diagram HDMI Device
HDMI IN
HDMI Device
5V USB
NAVI IN
UART I/F
LVDS OUT
HDMI IN
POWER
HDMI
HDMI
USB
(Female) (HDMI Extender)
NAVI IN
UART I/F
LVDS OUT
POWER
HDMI
(5V-1A Power output for HDMI Device)
5V USB
HDMI (Male)
USB
(5V-1A Power output for HDMI Device)
(HDMI Cable)
‘Stick Type’ HDMI Devices
‘Dongle & Adapter’ Type HDMI Devices
7
Navigation Connection Diagram
Navigation Connection Diagram
Navigation(GPS) Box
Navigation(GPS) Box
5V USB
NAVI IN
UART I/F
LVDS OUT
POWER
HDMI IN
5V USB
NAVI IN
UART I/F
HDMI
USB
LVDS OUT
POWER
HDMI Touch screen panel
Touch screen panel
USB
(USB cable connecting is for ‘N-Link’ only.)
HDMI
HDMI
HDMI IN
iNAVI - X1 CUBE
Microcity - N-Link
8
Compatibility Chart for Navigation(GPS) box models
Model
Dip S/W
Country
MICROCITY N-Link
Required Parts
(Navigation)
South Korea
-
HDMI Cable
Hazard Module (Refer to Page.11)
USB A-A Cable
OFF
↓ iNAVI X1 CUBE
800*480
ON 1
2
3
OFF(↑): 1, 2, 3, 4
4
South Korea OFF
↓
1280*480 BMW
ON 1
2
3
ON(↓): 1 / OFF(↑): 2, 3, 4
4
HDMI Cable (HDMI to HDMI)
ON
MYVI MS1400 Digital
↑ South Korea
1
2
3
4
OFF(↓): 1, 2, 3 ON(↑) : 4
•
The 'IW06B-N23(HD-Link)' supports navigation(GPS) box models equipped with 'Digital video output'.
•
It does not support the 'RGB video signals'.
HDMI Cable (HDMI to HDMI)
9
LVDS Connection Diagram LVDS Connection
HDMI IN
5V USB
NAVI IN
UART I/F
LVDS OUT
POWER
HDMI
•
'Genuine(OEM) LVDS connector' should be connected to 'LVDS IN / OUT PCB'.
•
‘Provided LVDS connector' should be connected to the monitor instead to the genuine connector.
LCD Cable
Monitor(OEM)
HDMI
(OEM LVDS Cable)
LVDS IN / OUT PCB (Provided LVDS Cable)
CIC-HIGH(NBT) Head Unit
10
Hazard Module Connection POWER / CAN
MODE TOUCH-IN
AV IN / OUT
DIP SWITCH Hazard button
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
6-pin Hazard connector AV2 IN L
AV2 IN R
AV2 IN V
AV1 IN V
AUDIO OUT L AUDIO OUT R
NAVI AUD IN L NAVI AUD IN R
REVERSE 12V IN
New Version Module
BMW/AUDI Hazard Light
Hazard Module (4-Pin)
IR OUT
GROUND
Hazard Module (3-Pin)
REAR 12V
REAR CAMERA
Old Version Module
Benz Hazard Light
Hazard Light
GND
IR IN
(For IW04-MB14)
1
2
3
4
5
6
핀 # 5 = Hazard(-) (Brown/Blue) 핀 # 5 = Hazard(-) (Orange) *MINI Cooper 핀 # 5 = Hazard(-) (Yellow/black) *New X5
IR IN GND (20 cm)
(100 cm)
*Hazard Module is just available with ‘Smart Drive function of N-Link’ navigation in South Korea. 11
Body Connector specifications POWER / CAN
1
2
3
4
5
6
7
8
9
MODE TOUCH-IN
DIP SWITCH
AV IN / OUT
1 2
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Length: 20 cm
Length : 100 cm AV2 IN L
AV2 IN R
AV2 IN V
AV1 IN V
AUDIO OUT L AUDIO OUT R
NAVI AUD IN L NAVI AUD IN R
IR OUT
GROUND REAR 12V
REVERSE 12V IN
REAR CAMERA
PAS CAN L
PAS CAN H
NAVI 12V OUT
GROUND
GROUND
BAT +
Length: 150 cm
•
1
BATTERY POWER INPUT
1
RV-CAM VIDEO INPUT
12
GND(RV-CAM VIDEO)
2
GND INPUT
2
RV-CAM POWER OUT
13
GND OUTPUT(RV-CAM)
3
GND OUTPUT
3
REVERSE DETECTION
14
IR OUT
4
ACC(12V) POWER OUTPUT
4
NAVI AUX INPUT R
15
GND(NAVI AUX IN R)
5
PAS CAN HIGH
5
NAVI AUX INPUT L
16
GND(NAVI AUX IN L)
6
PAS CAN LOW
6
AUDIO OUTPUT R
17
GND(AUDIO OUT R)
7
-
7
AUDIO OUTPUT L
18
GND(AUDIO OUT L)
8
-
8
AV1 VIDEO INPUT
19
GND(AV1 VIDEO IN)
9
-
10
-
Push Switch
The colors of each wires can be changed under manufacturer’s circumstance .
9
AV2 VIDEO INPUT
20
GND(AV2 VIDEO IN)
10
AV2 AUDIO INPUT R
21
GND(AV2 AUDIO IN R)
11
AV2 AUDIO INPUT L
22
GND(AV2 AUDIO IN L)
12
Car Compatibility Chart Car Models
Production Year
Specific Models
1 Series
2012 -
F20, F21
2 Series
2014 -
F22
3 Series
2012 -
F30, F31, F34(3 GT)
4 Series
2014 -
F32, F33, F36
The IW06B-N23 is used in combination
5 Series
2012 -
F10, F11, F07(5 GT)
6 Series
2012 -
F12, F13
7 Series
2012 -
F01, F02
X3
2012 -
F25
X4
2014 -
F26
with BMW iDrive CIC-HIGH(NBT) system.
The IW06B-N23 supports the BMW
original screen equipped with ‘6-pin LVDS round connector’ only. X5
2014 -
F15
X6
2015 -
F16
Please check the specification of original LVDS connector on the Mini Cooper
2014 -
F56
sidelines of a production year.
13
Activation by original buttons of BMW For BMW & MINI Cooper
1
1
Button
Function
1
Changing Modes
MENU
1 MENU
1
Shortcut to each modes
Operation
Remarks
Press the button 2 seconds long.
Order: HDMI → NAVI → AV2 → OEM
Press the button 2 times.
< OEM → NAVI >
Press the button 4 times.
< OEM → AV2 >
Back to OEM
Press the button short.
Return to the OEM mode in any modes.
Enter into the setting menu
Press the button 5 seconds long.
All functions of setting menu is controlled by COMAND controller.
Changing mode to Front View Camera mode(AV1)
Push the button left 2 seconds long.
It changes the screen from any modes to AV1 mode directly.
Push the button right 2 seconds long. (Only Rear,AV1)
You can use this function only for 3 modes. (Full, PIP Mode1, PIP Mode2)
Press the button 10 seconds long.
You can use this function when you get in trouble to see the screen while setting the screen.
Press the button short.
Return to the OEM mode in any modes.
MENU
2
3
BMW iDrive Controller
2
3
MINI iDrive Controller
3 OPTION
LEFT PUSH
RIGHT PUSH
2 BACK
Button
Changing mode to PIP(Rear)
Reset to factory default setting and power. Changing Modes
Around View Camera Button 14
DIP Switch Settings OFF
ON: ▼
OFF:▲
ON
Pin No.
ON(▼)
No.6
No.7
No.8
No.9
No.10
Car Models
OFF(▲)
OFF(▲)
OFF(▲)
OFF(▲)
OFF(▲)
5(F10), 6(F12), 7(F01),X5(F15) X3(F25), X4(F26), (10.2인치 / 8.8inch screen)
OFF(▲)
OFF(▲)
OFF(▲)
OFF(▲)
ON(▼)
1(F20), 2(F22), 3(F30), 4(F32), (6.5 screen Johnson)
OFF(▲)
OFF(▲)
OFF(▲)
ON(▼)
OFF(▲)
1(F20), 2(F22), 3(F30), 4(F32), (6.5 screen Tpo)
OFF(▲)
OFF(▲)
OFF(▲)
ON(▼)
ON(▼)
Mini Cooper(F56) (8.8 screen)
OFF(▲)
OFF(▲)
ON(▼)
OFF(▲)
OFF(▲)
Mini Cooper(F56) (6.5 screen)
OFF(▲)
OFF(▲)
ON(▼)
ON(▼)
ON(▼)
OFF(▲)
1
HDMI Mode
Skip HDMI Mode
2
Navigation Mode
Skip Navigation Mode
3
External Rear View Camera
Original Rear View Camera
4
External Front View Camera(AV1 Mode)
Skip External Front View Camera(AV1 Mode)
5
AV2 Mode
Skip AV2 Mode
6 7
8 9
Selection of car model
5(F10) *6.5-inch국외 (‘INNOLUX’) X3(F25) *6.5-inch국외(‘JOHNSON’)
10
15
DTV Diagram POWER / CAN
No.6
No.7
ON(▼)
OFF(▲)
No.8
No.9
No.10
MODE TOUCH-IN
AV IN / OUT
DIP SWITCH
Car Models
ASUKA DTV. Selection of car model
ON(▼)
*JAPAN ALPINE - TUE-T500 ·
ON(▼)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
AV2 IN L
AV2 IN R
AV2 IN V
AV1 IN V
AUDIO OUT L AUDIO OUT R
NAVI AUD IN L NAVI AUD IN R
REVERSE 12V IN
GROUND REAR 12V
REAR CAMERA
DTV IR Cable
IR OUT
OEM Button
Remote Control Button
Turn the dial clock wise
CH +
DVB-TV IR Sensor
Function
Red IR IN
Turn the dial counterclockwise
CH -
OK (Press Short)
OK
Left (Press Long)
EXIT
Power
White
SIGNAL
Black
GROUND
11
Settings For BMW & MINI Cooper Button
4
3
2
5
1
4
3
2
Operation
Enter into the setting menu
Press the button 5 seconds long.
1
OPTION
2
BACK
3
Selection
4
Turn the dial counterclockwise
Move the menupointer and adjust the setting values.
Move the pointer and setting values to up(↑) and left(←).
5
Turn the dial clockwise
Move the menupointer and adjust the setting values.
Move the pointer and setting values to down(↓) and right(→).
5
1
Function
Back to previous menu
Press the button short.
Select the menu and setting values.
Press the button short.
1. Enter into the setting menu.
- HDMI & Navigation settings - Rear view camera settings
- AV-input settings - System settings - System information 16
Settings 2. HDMI mode settings - Mode selection: HDMI ↔ NAVI - Image display = Adjust the values of brightness and contrast Red-Green-Blue colors of HDMI display.
- Screen position & size = Entry Disabled / Not applicable.
3. NAVI mode settings - Mode selection: NAVI ↔ HDMI - Image display = Adjust the values of brightness and contrast Red-Green-Blue colors of NAVI display.
- Screen position & size = Entry Disabled / Not applicable.
- Navigation Resolution selection ① 800 X 480
② 1280 X 480
17
Settings 4. Rear view camera settings - Parking guide lines = Adjust position of parking guide lines and select the lines ‘ON or OFF’.
- Parking distance control = Adjust the position of parking distance control sensors to ‘LEFT or RIGHT’ and select the PDC ‘ON or OFF’.
- Image display = Adjust the values of brightness and contrast Red-Green-Blue colors of Rear view camera display.
5. AV1(Front view camera) settings - Mode selection: AV1(Front view camera) ↔ AV2 - Image display = Adjust the values of brightness and contrast Red-Green-Blue colors of AV1(Front view camera) display.
- Screen position & size = Entry Disabled / Not applicable.
- Automatic activation function(AV1) = * Please refer to next page.
- Parking distance control = Adjust the position of parking distance control sensors to ‘LEFT or RIGHT’ and select the PDC ‘ON or OFF’.
18
Settings 6. Automatic activation function(AV1) - Shift gear from reverse to drive - Shift gear from parking to drive * When you shift gear ‘from reverse to drive’ or ‘from parking to drive’, it just works automatically during the activation time you selected.
7. AV2 settings - Mode selection: AV2 ↔ AV1(Front view camera) - Image display = Adjust the values of brightness and contrast Red-Green-Blue colors of AV2 display.
- Screen position & size = Entry Disabled / Not applicable.
19
Settings (SURROUND VIEW OPTION)
Keep the rear camera view - Shift gear from reverse to drive - Shift gear from parking to drive * When you shift gear ‘from reverse to drive’ or ‘from parking to drive’, it just works during the activation time you selected.
20
Settings 8. System settings - Safe mode = Select the one of two between ‘ON and OFF’. * If you select ‘ON’, 3 modes(HDMI, NAVI and AV2) will be faded out when the car is driven.
- Factory default = Reset all setting values to factory default setting.
9. System information - Mode name : IW06B-N23 - Firmware date : 2016 – 11 – 21 (Latest firmware date) -
= You can check the current firmware version date.
- Dip switch settings = You can check the current positions of dip switch settings.
21
Settings 10. Information of Dip switch settings * You can check the current positions of dip switch settings.
ex 1) Actual DIP switch values. (→)
ex 2) Actual DIP switch values. (→)
Appears on the setting menu. (↓)
Appears on the setting menu. (↓)
22
Manufactured by
Distributed by
Copyright ⓒ indiwork. All Rights Reserved.
