THREAD REPAIR INSERTS

Australia Recoil Pty (Head Office) ACN 073 750 428 20 Stamford Road Oakleigh Vic 3166 Telephone +61 3 9563 1500 Facsimile +61 3 9563 1980 E-mail sales...

0 downloads 191 Views 2MB Size
KEYSERT

THREAD REPAIR INSERTS

KEYSERT

Thread Repair Inserts The Solid Alternative for Thread Repair Keyserts are solid, one-piece, key-locking inserts used to repair damaged threads or for use in original equipment. The Keysert locking keys provide a positive mechanical lock which prevents rotation due to vibration or torsion. Keyserts are available in carbon or stainless steel, both in inch and metric series. Thinwall, Heavy Duty, Extra Heavy Duty, and Solid insert styles are available separately or in repair kits containing a range of sizes. Installation tools are also available separately.

Features • • •



Table of Contents

Installed with standard drills and taps Easy installation May be used in virtually any material; aluminum, magnesium, cast iron, cold rolled steel, and plastic. Easy to remove

Description, Features, Typical Applications..... 2 Installation and Removal............................... 3 Thinwall and Heavy Duty Inch Series Carbon Steel Bulk Inserts ........................ 4 Thinwall and Heavy Duty Metric Carbon Steel Bulk Inserts ........................ 5 Solid Inch Series and Metric Carbon Steel Bulk Inserts ........................ 6 Extra Heavy Duty Inch Series Carbon Steel Bulk Inserts ........................ 7 Carbon Steel Cross-Reference Index ...................................................... 7 Thinwall and Heavy Duty Inch Series Stainless Steel Bulk Inserts....................... 8 Thinwall and Heavy Duty Metric Stainless Steel Bulk Inserts....................... 9 Solid Inch Series and Metric Stainless Steel Bulk Inserts..................... 10 Extra Heavy Duty Inch Series Stainless Steel Bulk Inserts..................... 11

Typical Applications • • • • • •

Trucks Machinery RV’s Small Engine Molds Tool and Die

Fairchild Fasteners - Industrial Products Division

2

Installation and Removal

Installation

Drill out old threads with a standard drill. Note: Drill is oversize see charts for proper dimensions. Chamfer the hole with a standard countersink (82°-100°).

Tap new threads with Screw in the insert until a standard tap. Seeslightly below surface. charts for proper size and depth.

Drive keys down with several hammer taps on the proper installation tool.

Deflect keys inward and break off.

Same size replacement insert may be installed in the original hole.

Removal

Drill out material between keys and internal thread with standard drill to specified depth (refer to charts for proper dimensions).

3

Remove insert using a Drill-Out, E-Z Out, or similar type tool.

Fairchild Fasteners - Industrial Products Division

Carbon Steel Bulk Keyserts Thinwall - Inch Series - Carbon Steel Insert Part No. *73601 *74601 *73041 *74041 *73051 *74051 *73061 *74061 *73071 *74071 *73081 *74081

Alternate Part No. RKKA 10-24 RKKA 10-32 RKKA 1/4-20 RKKA 1/4-28 RKKA 5/16-18 RKKA 5/16-24 RKKA 3/8-16 RKKA 3/8-24 RKKA 7/16-14 RKKA 7/16-20 RKKA 1/2-13 RKKA 1/2-20

INSERT Internal External Installation Thread Thread (Mod.) Tool Class 2B Class 2A Length Part No. 10-24 5/16-18 0.31 70601 10-32 1/4-20 3/8-16 0.37 70041 1/4-28 5/16-18 7/16-14 0.43 70051 5/16-24 3/8-16 1/2-13 0.50 70061 3/8-24 7/16-14 9/16-12 0.56 70071 7/16-20 1/2-13 5/8-11 0.62 70081 1/2-20

INSTALLATION Tap C'Sink Thread Tap Drill Diameter Size Min. Size +.010/-.000 Class 2B Depth I 0.32 5/16-18 0.37

REMOVAL Drill Size 7/32

Depth 1/8

Q

0.38

3/8-16

0.43

9/32

3/16

X

0.44

7/16-14

0.50

11/32

3/16

29/64

0.51

1/2-13

0.56

13/32

3/16

33/64

0.57

9/16-12

0.62

15/32

3/16

37/64

0.63

5/8-11

0.68

17/32

3/16

Heavy Duty - Inch Series - Carbon Steel Insert Part No. *73582 *73602 *74602 *73042 *74042 *73052 *74052 *73062 *74062 *73072 *74072 *73082 *74082 *73092 *74092 *73102 *74102 *73122 *74122 *73142 *74142 *73162 *74162 74162-14 *73182 *74182 *73202 *74202 *73242 *74242

Alternate Part No. RKK RKK RKK RKK RKK RKK RKK RKK RKK RKK RKK RKK RKK RKK RKK RKK RKK RKK

10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 9/16-12 9/16-18 5/8-11 5/8-18 3/4-10 3/4-16

RKK 1-8 RKK 1-12

INSERT INSTALLATION Internal External Installation Tap C'Sink Thread Thread (Mod.) Tool Drill Diameter Class 2B Class 2A Length Part No. Size +.010/-.000 8-32 5/16-18 0.31 70582 I 0.32 10-24 3/8-16 0.31 70602 Q 0.38 10-32 1/4-20 7/16-14 0.37 70042 X 0.44 1/4-28 5/16-18 1/2-13 0.43 70052 29/64 0.51 5/16-24 3/8-16 9/16-12 0.50 70062 33/64 0.57 3/8-24 7/16-14 5/8-11 0.62 70072 37/64 0.63 7/16-20 1/2-13 3/4-16 0.62 70082 45/64 0.76 1/2-20 9/16-12 3/4-16 0.81 70092 45/64 0.76 9/16-18 5/8-11 7/8-14 0.87 70102 53/64 0.88 5/8-18 3/4-10 1 1/8-12 1.12 70122 1 1/16 1.14 3/4-16 7/8-9 1 1/4-12 1.25 70142 1 3/16 1.27 7/8-14 1-8 1 3/8-12 1.37 70162 1 5/16 1.39 1-12 1-14 1 1/8-7 1 1/2-12 1.62 70182 1 7/16 1.52 1 1/8-12 1 1/4-7 1 5/8-12 1.81 70202 1 9/16 1.64 1 1/4-12 1 1/2-6 1 7/8-12 2.00 70242 1 13/16 1.89 1 1/2-12

* INDICATES PARTS NORMALLY AVAILABLE FROM STOCK. LEAD TIMES AND MINIMUMS MAY APPLY ON ALL OTHER SIZES.

Fairchild Fasteners - Industrial Products Division

4

Thread Tap Size Min. Class 2B Depth 5/16-18 0.37 3/8-16 0.37

REMOVAL Drill Size 7/32 9/32

Depth 1/8 1/8

7/16-14

0.43

11/32

3/16

1/2-13

0.50

13/32

3/16

9/16-12

0.56

15/32

3/16

5/8-11

0.68

17/32

3/16

3/4-16

0.68

21/32

3/16

3/4-16

0.94

21/32

3/16

7/8-14

1.00

25/32

5/16

1 1/8-12

1.31

31/32

5/16

1 1/4-12

1.44 1 3/32

5/16

1 3/8-12

1.56 1 7/32

5/16

1 1/2-12

1.84 1 11/32 5/16

1 5/8-12

2.06 1 15/32 5/16

1 7/8-12

2.28 1 23/32 5/16

Carbon Steel Bulk Keyserts Technical Notes : Material: Inserts - C1215 or equivalent Keys - 302 Stainless Steel Finish: Carbon Steel Inserts - Zinc Phosphate and Ferrocote 364-3 Oil Stainless Steel Inserts - Passivated Tolerances: ±0.10 inch or ±.25 mm unless specified otherwise. Dimensions: Inch sizes are in inches. Metric sizes are in millimeters. Keys: Inserts with internal thread size 5/16 or M7 and larger are furnished with 4 locking keys.

Thinwall - Metric - Carbon Steel Insert Part No. *75051 *75061 *75081 *77081 *75101 *77101 *75121 *78121

Internal Alternate Thread Part No. Class 6H KNM 5X0.8F M5-.8 KNM 6X1F M6-1 KNM 8X1.25F M8-1.25 M8-1 KNM 10X1.5F M10-1.5 M10-1.25 KNM 12X1.75F M12-1.75 M12-1.25

INSERT External Thread Class 6g M8-1.25 M10-1.25 M12-1.25

Length 8.0 10.0 12.0

Installation Tool Part No. 71051 71061 71081

INSTALLATION Tap C'Sink Drill Diameter Size +.25/-.00 6.9 8.25 8.8 10.25 10.8 12.25

M14-1.5

14.0

71101

12.8

M16-1.5

16.0

71121

14.75

REMOVAL Drill

Thread Tap Size Min. Class 6H Depth M8-1.25 9.5 M10-1.25 11.5 M12-1.25 13.5

Size Depth 5.50 4.00 7.50 4.75 9.50 4.75

14.25

M14-1.5

15.5

11.50

4.75

16.25

M16-1.5

17.5

13.50

4.75

Heavy Duty - Metric - Carbon Steel Insert Part No. 75042 75052 75062 75082 77082 75102 77102 75122 78122 *75142 *77142 *75162 *77162 *78182 *75202 *78202 *78222 75242 *77242

Internal Thread Class 6H M4-.7 M5-.8 M6-1 M8-1.25 M8-1 M10-1.5 M10-1.25 M12-1.75 M12-1.25 M14-2 M14-1.5 M16-2 M16-1.5 M18-1.5 M20-2.5 M20-1.5 M22-1.5 M24-3 M24-2

INSERT External Thread Class 6g M8-1.25 M10-1.25 M12-1.25 M14-1.5

Length 8.0 10.0 12.0 14.0

Installation Tool Part No. 71042 71052 71062 71082

INSTALLATION Tap C'Sink Thread Tap Drill Diameter Size Min. Size +.25/-.00 Class 6H Depth 6.90 8.25 M8-1.25 9.5 8.80 10.25 M10-1.25 12.5 10.80 12.25 M12-1.25 14.5 12.80 14.25 M14-1.5 16.5

REMOVAL Drill

M16-1.5

16.0

71102

14.75

16.25

M16-1.5

18.5

13.50

4.75

M18-1.5

18.0

71122

16.75

18.25

M18-1.5

20.5

15.50

4.75

M20-1.5

20.0

71142

18.75

20.25

M20-1.5

22.5

17.50

4.75

M22-1.5

22.0

71162

20.50

22.25

M22-1.5

24.5

17.75

6.35

M24-1.5 M30-2

24.0 30.0

71182 71202

22.50 28.00

24.25 30.25

M24-1.5 M30-2

26.5 34.5

19.75 25.75

6.35 6.35

M32-2 M33-2

32.0 33.0

71222 71242

30.00 31.00

32.25 33.25

M32-2 M33-2

36.5 37.5

27.75 28.75

6.35 6.35

Size Depth 5.50 4.00 7.50 4.75 9.50 4.75 11.50 4.75

* INDICATES PARTS NORMALLY AVAILABLE FROM STOCK. LEAD TIMES AND MINIMUMS MAY APPLY ON ALL OTHER SIZES.

5

Fairchild Fasteners - Industrial Products Division

Carbon Steel Bulk Keyserts Solid threaded inserts are perfect for: - relocating holes that have been drilled or tapped in the wrong place - plugging holes or filling in holes that are too big Technical Notes : Material: Inserts - C1215 or equivalent Keys - 302 Stainless Steel Finish: Carbon Steel Inserts - Zinc Phosphate and Ferrocote 364-3 Oil Stainless Steel Inserts - Passivated Tolerances: ±0.10 inch or ±.25 mm unless specified otherwise. Dimensions: Inch sizes are in inches. Metric sizes are in millimeters. Keys: Inserts with internal thread size 5/16 or M7 and larger are furnished with 4 locking keys.

Solid - Inch Series - Carbon Steel Insert Part No. 73054 73064 73074 73084 73094 73104 73124 73144 74164 74184 74204 74224

INSTALLATION External Installation Tap C'Sink Thread (Mod.) Tool Drill Diameter Class 2A Length Part No. Size +.010/-.000 5/16-18 0.31 70054 I 0.32 3/8-16 0.31 70064 Q 0.38 7/16-14 0.37 70074 X 0.44 1/2-13 0.43 70084 29/64 0.51 9/16-12 0.50 70094 33/64 0.57 5/8-11 0.62 70104 37/64 0.63 3/4-16 0.68 70124 45/64 0.76 7/8-14 0.87 70144 53/64 0.88 1-12 0.87 70164 15/16 1.02 1 1/8-12 1.12 70184 1 1/16 1.14 1 1/4-12 1.25 70204 1 3/16 1.27 1 3/8-12 1.37 70224 1 5/16 1.39

Thread Tap Size Min. Class 2B Depth 5/16-18 0.37 3/8-16 0.37 7/16-14 0.43 1/2-13 0.50 9/16-12 0.56 5/8-11 0.68 3/4-16 0.68 7/8-14 1.00 1-12 1.00 1 1/8-12 1.31 1 1/4-12 1.44 1 3/8-12 1.56

REMOVAL Drill Size 7/32 9/32 11/32 13/32 15/32 17/32 21/32 25/32 27/32 31/32 1 3/32 1 7/32

Depth 1/8 1/8 3/16 3/16 3/16 3/16 3/16 5/16 5/16 5/16 5/16 5/16

Solid - Metric - Carbon Steel Insert Part No. 75084 77104 78124 77144 77164 78184 78204 78224 78244 77304 77322 77332

External Thread Class 6g M8-1.25 M10-1.25 M12-1.25 M14-1.5 M16-1.5 M18-1.5 M20-1.5 M22-1.5 M24-1.5 M30-2 M32-2 M33-2

Installation Tool Length Part No. 8.0 71084 10.0 71104 12.0 71124 14.0 71144 16.0 71164 18.0 71184 20.0 71204 22.0 71224 24.0 71244 30.0 71304 32.0 71322 33.0 71332

INSTALLATION Tap C'Sink Thread Tap Drill Diameter Size Min. Size +.25/-.00 Class 6H Depth 6.90 8.25 M8-1.25 9.5 8.80 10.25 M10-1.25 12.5 10.80 12.25 M12-1.25 14.5 12.80 14.25 M14-1.5 16.5 14.75 16.25 M16-1.5 18.5 16.75 18.25 M18-1.5 20.5 18.75 20.25 M20-1.5 22.5 20.50 22.25 M22-1.5 24.5 22.50 24.25 M24-1.5 26.5 28.00 30.25 M30-2 34.5 30.00 32.25 M32-2 36.5 31.00 33.25 M33-2 37.5

ALL ITEMS ON THIS PAGE ARE CONSIDERED NON-STOCK ITEMS. LEAD TIMES AND MINIMUMS MAY APPLY.

Fairchild Fasteners - Industrial Products Division

6

REMOVAL Drill Size Depth 5.50 4.00 7.50 4.75 9.50 4.75 11.50 4.75 13.50 4.75 15.50 4.75 17.50 4.75 17.75 6.35 19.75 6.35 25.75 6.35 27.75 6.35 28.75 6.35

Carbon Steel Bulk Keyserts Extra Heavy Duty - Inch Series - Carbon Steel INSERT Internal External Insert Thread Thread (Mod.) Part No. Class 2B Class 2A 73563 6-32 5/16-18 73583 8-32 3/8-16 73603 10-24 7/16-14 74603 10-32 73043 1/4-20 1/2-13 74043 1/4-28 73053 5/16-18 9/16-12 74053 5/16-24 73063 3/8-16 5/8-11 74063 3/8-24 73073 7/16-14 3/4-16 74073 7/16-20 73083 1/2-13 7/8-14 74083 1/2-20 73093 9/16-12 7/8-14 74093 9/16-18 73103 5/8-11 1-12 74103 5/8-18 73123 3/4-10 1 1/4-12 74123 3/4-16 73143 7/8-9 1 3/8-12 74143 7/8-14 73163 1-8 1 1/2-12 74163 1-12

INSTALLATION Tap C'Sink Thread Tap Drill Diameter Size Min. Size +.010/-.000 Class 2B Depth I 0.32 5/16-18 0.37 Q 0.38 3/8-16 0.37 X 0.44 7/16-14 0.37

Length 0.31 0.31 0.31

Installation Tool Part No. 70563 70583 70603

0.37

70043

29/64

0.51

1/2-13

0.43

70053

33/64

0.57

0.50

70063

37/64

0.62

70073

0.68

REMOVAL Drill Size 7/32 9/32 11/32

Depth 1/8 1/8 3/16

0.43

13/32

3/16

9/16-12

0.50

15/32

3/16

0.63

5/8-11

0.56

17/32

3/16

45/64

0.76

3/4-16

0.68

21/32

3/16

70083

53/64

0.88

7/8-14

0.75

25/32

5/16

0.81

70093

53/64

0.88

7/8-14

0.94

25/32

5/16

0.87

70103

15/16

1.02

1-12

1.00

27/32

5/16

1.12

70123

1 3/16

1.27

1 1/4-12

1.31 1 3/32

5/16

1.25

70143

1 5/16

1.39

1 3/8-12

1.44 1 7/32

5/16

1.37

70163

1 7/16

1.52

1 1/2-12

1.56 1 11/32

5/16

ALL ITEMS ON THIS PAGE ARE CONSIDERED NON-STOCK ITEMS. LEAD TIMES AND MINIMUMS MAY APPLY.

Carbon Steel Cross-Reference Index Keysert Part No. 73041 73042 73051 73052 73061 73062 73071 73072 73081 73082 73092 73102 73122 73142 73162 73182 73202 73242 73582

Alternate Part No. RKKA 1/4-20 RKK 1/4-20 RKKA 5/16-18 RKK 5/16-18 RKKA 3/8-16 RKK 3/8-16 RKKA 7/16-14 RKK 7/16-14 RKKA 1/2-13 RKK 1/2-13 RKK 9/16-12 RKK 5/8-11 RKK 3/4-10 RKK 7/8-9 RKK 1-8 RKK 1 1/8-7 RKK 1 1/4-7 RKK 1 1/2-6 RKK 8-32

Keysert Part No. 73601 73602 74041 74042 74051 74052 74061 74062 74071 74072 74081 74082 74092 74102 74122 74142 74162-14 74162 74182

Alternate Part No. RKKA 10-24 RKK 10-24 RKKA 1/4-28 RKK 1/4-28 RKKA 5/16-24 RKK 5/16-24 RKKA 3/8-24 RKK 3/8-24 RKKA 7/16-20 RKK 7/16-20 RKKA 1/2-20 RKK 1/2-20 RKK 9/16-18 RKK 5/8-18 RKK 3/4-16 RKK 7/8-14 RKK 1-14 RKK 1-12 RKK 1 1/8-12

7

Keysert Part No. 74202 74242 74601 74602 75051 75061 75081 75101 75121 77081 77101 78121 75142 77142 77162 78182 78202 78222 77242

Alternate Part No. RKK 1 1/4-12 RKK 1 1/2-12 RKKA 10-32 RKK 10-32 KNM 5x0.8F KNM 6x1F KNM 8x1.25F KNM 10x1.5F KNM 12x1.75F KNM 8x1F KNM 10x1.25F KNM 12x1.25F KNHM 14x2F KNHM 14x1.5F KNHM 16x1.5F KNHM 18x1.5F KNHM 20x1.5F KNHM 22x1.5F KNHM 24x2F

Fairchild Fasteners - Industrial Products Division

Stainless Steel Bulk Keyserts Thinwall - Inch Series - Stainless Steel Insert Part No. *73606 *74606 *73046 *74046 *73056 *74056 *73066 *74066 *73076 74076 *73086 *74086

Internal Thread Class 2B or 3B

10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20

INSERT External Installation Thread (Mod) Tool Class 2A Length Part No. 5/16-18 0.31 70601

INSTALLATION Tap C'Sink Thread Tap Drill Diameter Size Min. Size +.010/-.000 Class 2B Depth I 0.32 5/16-18 0.37 0.43

REMOVAL Drill Size 7/32

Depth 1/8

9/32

3/16

3/8-16

0.37

70041

Q

0.38

3/8-16

7/16-14

0.43

70051

X

0.44

7/16-14

0.50 11/32

3/16

1/2-13

0.50

70061

29/64

0.51

1/2-13

0.56 13/32

3/16

9/16-12

0.56

70071

33/64

0.57

9/16-12

0.62 15/32

3/16

5/8-11

0.62

70081

37/64

0.63

5/8-11

0.68 17/32

3/16

Heavy Duty - Inch Series - Stainless Steel Insert Part No. *73587 *73607 *74607 *73047 *74047 *73057 *74057 *73067 *74067 *73077 74077 *73087NONMS *74087NONMS 73097 74097 73107 74107 73127 74127 73147 74147 73167 74167

Internal Thread Class 2B or 3B

8-32 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 9/16-12 9/16-18 5/8-11 5/8-18 3/4-10 3/4-16 7/8-9 7/8-14 1-8 1-12

INSERT External Installation Thread (Mod) Tool Class 2A Length Part No. 5/16-18 0.31 70582 3/8-16 0.31 70602

INSTALLATION Tap C'Sink Thread Tap Drill Diameter Size Min. Size +.010/-.000 Class 2B Depth I 0.32 5/16-18 0.37 Q 0.38 3/8-16 0.37

Size 7/32 9/32

Depth 1/8 1/8

7/16-14

0.37

70042

X

0.44

7/16-14

0.43 11/32

3/16

1/2-13

0.43

70052

29/64

0.51

1/2-13

0.50 13/32

3/16

9/16-12

0.50

70062

33/64

0.57

9/16-12

0.56 15/32

3/16

5/8-11

0.62

70072

37/64

0.63

5/8-11

0.68 17/32

3/16

3/4-16

0.62

70082

45/64

0.76

3/4-16

0.68 21/32

3/16

3/4-16

0.81

70092

45/64

0.76

3/4-16

0.94 21/32

3/16

7/8-14

0.87

70102

53/64

0.88

7/8-14

1.00 25/32

5/16

1 1/8-12

1.12

70122

1 1/16

1.14

1 1/8-12

1.31 31/32

5/16

1 1/4-12

1.25

70142

1 3/16

1.27

1 1/4-12

1.44 1 3/32 5/16

1 3/8-12

1.37

70162

1 5/16

1.39

1 3/8-12

1.56 1 7/32 5/16

* INDICATES PARTS NORMALLY AVAILABLE FROM STOCK AND INTERNAL THREAD CLASS 3B. LEAD TIMES AND MINIMUMS MAY APPLY ON ALL OTHER SIZES.

Fairchild Fasteners - Industrial Products Division

REMOVAL Drill

8

Stainless Steel Bulk Keyserts Technical Notes : Material: Inserts - 303 Stainless Steel Keys - 302 Stainless Steel Finish: Carbon Steel Inserts - Zinc Phosphate and Ferrocote 364-3 Oil Stainless Steel Inserts - Passivated Tolerances: ±0.10 inch or ±.25 mm unless specified otherwise. Dimensions: Inch sizes are in inches. Metric sizes are in millimeters. Keys: Inserts with internal thread size 5/16 or M7 and larger are furnished with 4 locking keys.

Thinwall - Metric - Stainless Steel Insert Part No. *75056 *75066 *75086 77086 *75106 77106 *75126 78126

Internal Thread Class 6H M5-.8 M6-1 M8-1.25 M8-1 M10-1.5 M10-1.25 M12-1.75 M12-1.25

INSERT External Thread Class 6g M8-1.25 M10-1.25 M12-1.25

Installation Tool Length Part No. 8.0 71051 10.0 71061 12.0 71081

INSTALLATION Tap C'Sink Thread Tap Drill Diameter Size Min. Size +.25/-.00 Class 6H Depth 6.9 8.25 M8-1.25 9.5 8.8 10.25 M10-1.25 11.5 10.8 12.25 M12-1.25 13.5

REMOVAL Drill Size Depth 5.50 4.00 7.50 4.75 9.50 4.75

M14-1.5

14.0

71101

12.8

14.25

M14-1.5

15.5

11.50

4.75

M16-1.5

16.0

71121

14.75

16.25

M16-1.5

17.5

13.50

4.75

Heavy Duty - Metric - Stainless Steel Insert Part No. 75047 75057 75067 75087 77087 75107 77107 75127 78127 75147 77147 75167 77167 78187 75207 78207 78227 75247 77247

Internal Thread Class 6H M4-.7 M5-.8 M6-1 M8-1.25 M8-1 M10-1.5 M10-1.25 M12-1.75 M12-1.25 M14-2 M14-1.5 M16-2 M16-1.5 M18-1.5 M20-2.5 M20-1.5 M22-1.5 M24-3 M24-2

INSERT External Thread Class 6g M8-1.25 M10-1.25 M12-1.25 M14-1.5

Installation Tool Length Part No. 8.0 71042 10.0 71052 12.0 71062 14.0 71082

INSTALLATION Tap C'Sink Thread Tap Drill Diameter Size Min. Size +.25/-.00 Class 6H Depth 6.90 8.25 M8-1.25 9.5 8.80 10.25 M10-1.25 12.5 10.80 12.25 M12-1.25 14.5 12.80 14.25 M14-1.5 16.5

REMOVAL Drill Size Depth 5.50 4.00 7.50 4.75 9.50 4.75 11.50 4.75

M16-1.5

16.0

71102

14.75

16.25

M16-1.5

18.5

13.50

4.75

M18-1.5

18.0

71122

16.75

18.25

M18-1.5

20.5

15.50

4.75

M20-1.5

20.0

71142

18.75

20.25

M20-1.5

22.5

17.50

4.75

M22-1.5

22.0

71162

20.50

22.25

M22-1.5

24.5

17.75

6.35

M24-1.5 M30-2

24.0 30.0

71182 71202

22.50 28.00

24.25 30.25

M24-1.5 M30-2

26.5 34.5

19.75 25.75

6.35 6.35

M32-2 M33-2

32.0 33.0

71222 71242

30.00 31.00

32.25 33.25

M32-2 M33-2

36.5 37.5

27.75 28.75

6.35 6.35

* INDICATES PARTS NORMALLY AVAILABLE FROM STOCK. LEAD TIMES AND MINIMUMS MAY APPLY ON ALL OTHER SIZES.

9

Fairchild Fasteners - Industrial Products Division

Stainless Steel Bulk Keyserts Solid threaded inserts are perfect for: - relocating holes that have been drilled or tapped in the wrong place - plugging holes or filling in holes that are too big Technical Notes : Material: Inserts - 303 Stainless Steel Keys - 302 Stainless Steel Finish: Carbon Steel Inserts - Zinc Phosphate and Ferrocote 364-3 Oil Stainless Steel Inserts - Passivated Tolerances: ±0.10 inch or ±.25 mm unless specified otherwise. Dimensions: Inch sizes are in inches. Metric sizes are in millimeters. Keys: Inserts with internal thread size 5/16 or M7 and larger are furnished with 4 locking keys.

Solid - Inch Series - Stainless Steel Insert Part No. 73059 73069 73079 73089 73099 73109 73129 73149 74169 74189 74209 74229

INSTALLATION External Installation Tap C'Sink Thread (Mod.) Tool Drill Diameter Class 2A Length Part No. Size +.010/-.000 5/16-18 0.31 70054 I 0.32 3/8-16 0.31 70064 Q 0.38 7/16-14 0.37 70074 X 0.44 1/2-13 0.43 70084 29/64 0.51 9/16-12 0.50 70094 33/64 0.57 5/8-11 0.62 70104 37/64 0.63 3/4-16 0.68 70124 45/64 0.76 7/8-14 0.87 70144 53/64 0.88 1-12 0.87 70164 15/16 1.02 1 1/8-12 1.12 70184 1 1/16 1.14 1 1/4-12 1.25 70204 1 3/16 1.27 1 3/8-12 1.37 70224 1 5/16 1.39

Thread Tap Size Min. Class 2B Depth 5/16-18 0.37 3/8-16 0.37 7/16-14 0.43 1/2-13 0.50 9/16-12 0.56 5/8-11 0.68 3/4-16 0.68 7/8-14 1.00 1-12 1.00 1 1/8-12 1.31 1 1/4-12 1.44 1 3/8-12 1.56

ALL ITEMS ON THIS PAGE ARE CONSIDERED NON-STOCK ITEMS. LEAD TIMES AND MINIMUMS MAY APPLY.

Fairchild Fasteners - Industrial Products Division

10

REMOVAL Drill Size 7/32 9/32 11/32 13/32 15/32 17/32 21/32 25/32 27/32 31/32 1 3/32 1 7/32

Depth 1/8 1/8 3/16 3/16 3/16 3/16 3/16 5/16 5/16 5/16 5/16 5/16

Stainless Steel Bulk Keyserts Extra Heavy Duty - Inch Series - Stainless Steel INSERT INSTALLATION Internal External Installation Tap C'Sink Insert Thread Thread (Mod.) Tool Drill Diameter Part No. Class 2B Class 2A Length Part No. Size +.010/-.000 73568 6-32 5/16-18 0.31 70563 I 0.32 73588 8-32 3/8-16 0.31 70583 Q 0.38 73608 10-24 7/16-14 0.31 70603 X 0.44 74608 10-32 73048 1/4-20 1/2-13 0.37 70043 29/64 0.51 74048 1/4-28 73058 5/16-18 9/16-12 0.43 70053 33/64 0.57 74058 5/16-24 73068 3/8-16 5/8-11 0.50 70063 37/64 0.63 74068 3/8-24 73078 7/16-14 3/4-16 0.62 70073 45/64 0.76 74078 7/16-20 73088 1/2-13 7/8-14 0.68 70083 53/64 0.88 74088 1/2-20 73098 9/16-12 7/8-14 0.81 70093 53/64 0.88 74098 9/16-18 73108 5/8-11 1-12 0.87 70103 15/16 1.02 74108 5/8-18 73128 3/4-10 1 1/4-12 1.12 70123 1 3/16 1.27 74128 3/4-16 73148 7/8-9 1 3/8-12 1.25 70143 1 5/16 1.39 74148 7/8-14 73168 1-8 1 1/2-12 1.37 70163 1 7/16 1.52 74168 1-12

Thread Tap Size Min. Class 2B Depth 5/16-18 0.37 3/8-16 0.37 7/16-14 0.37

REMOVAL Drill Size 7/32 9/32 11/32

Depth 1/8 1/8 3/16

1/2-13

0.43

13/32

3/16

9/16-12

0.50

15/32

3/16

5/8-11

0.56

17/32

3/16

3/4-16

0.68

21/32

3/16

7/8-14

0.75

25/32

5/16

7/8-14

0.94

25/32

5/16

1-12

1.00

27/32

5/16

1 1/4-12

1.31 1 3/32

5/16

1 3/8-12

1.44 1 7/32

5/16

1 1/2-12

1.56 1 11/32

5/16

ALL ITEMS ON THIS PAGE ARE CONSIDERED NON-STOCK ITEMS. LEAD TIMES AND MINIMUMS MAY APPLY.

11

Fairchild Fasteners - Industrial Products Division

Australia Recoil Pty (Head Office) ACN 073 750 428 20 Stamford Road Oakleigh Vic 3166 Telephone +61 3 9563 1500 Facsimile +61 3 9563 1980 E-mail [email protected] Website http:\\www.recoil.com.au USA Recoil USA 1051 Third Avenue SW Carmel IN 46032 Telephone (317) 846 8830 or (800) 826 2884 Facsimile (317) 846 8858 or (800) 5-RECOIL E-mail [email protected] United Kingdom Recoil (Europe) Ltd Unit 7, Fallings Park Industrial Estate, Park Lane Wolverhampton WV10 9QE Telephone (01902) 307 800 Facsimile (01902) 307 829 Email [email protected] Belgium Recoil Marketing BVBA Langestraat 103 B-9300 Aalst, Belgium Telephone 32(0) 5377 0102 Facsimile 32(0) 5377 4310 Email [email protected] Singapore Recoil Pte Ltd Blk 194 Pandan Loop #07-16, Pantech Industrial Complex Singapore 128383 Telephone (65) 778 9233 Facsimile (65) 778 0151 Email [email protected] Thailand Recoil Co. Ltd 33/260 Mooban Tor Ruam Chok 11 Chok Chai 4, Ladprao 53 Road Ladprao, Bangkok 10230 Telephone (+662) 539 0693 Facsimile (+662) 539 0638 E-mail [email protected] Notices and Disclaimers: We reserve the right to make changes without notice in our products and in the information published about them. The statements and information in this publication are only for general guidance, and are not warranties or binding descriptions. Requests for more information are welcome. The user assumes full responsibility for his or her applications. There is no warranty of fitness for a particular purpose. No one is authorised by our company to make oral warranties. Our exclusive warranty and remedy are stated in our written terms and conditions of sale. The remedy is essentially repair, replacement or refund by us for a one year warranty period. All other remedies and liability from any cause for costs, losses and damages of any kind including consequential are excluded. Our standard terms and conditions of sale, unless modified in writing and signed by our authorised representatives, apply exclusively to all orders, including telephone and facsimile orders. Printed in Australia 1050-A4 6/98