Worldwide Homologations

TÜV SÜD (Thailand) Slide 3 China Compulsory Product Certification System •Implemented on May 1, 2002 •Old system was annulled on Aug. 1, 2003 •Scope: ...

0 downloads 13 Views 634KB Size
Worldwide Homologations

CHINA (CCC-mark)

Brazil (INMETRO/I-mark)

TÜV SÜD Thailand


Slide 1

China Compulsory Product Certification System

TÜV SÜD (Thailand)

Slide 2

China Compulsory Product Certification System • Implemented on May 1, 2002 • Old system was annulled on Aug. 1, 2003 • Scope: Products related to human life and health, animals, plants, environmental protection and national security. Not allowed to imported or sold without CCC-approval •Certification mode: one or more of the six certification modes, normally, for most products, the following combination mode is applied: “Type test + Initial FI + Follow Up FI”

TÜV SÜD (Thailand)

Slide 3

China Compulsory Certification * Automotive Products covered by CCC Automobile parts products; 1. Automobile Honks Products 2. Automobile Retro Reflector products 3. Automobile Brake Tube Products 4. Automobile Lighting and Indicator Devices 5. Automobile Rearview Mirrors Products 6. Automobile Interior Decoration Products 7. Automobile Door Locks and Door Maintenance Devices Products 8. Automobile Fuel Tanks Products 9. Automobile Seats and Pillows Products 10. Motorcycle Exterior Lighting and Indicator Devices 11. Motorcycle Rearview Mirrors Products 12. Automobile Driving Recorders 13. Automobile Body Reflector Marks Products 14. Tires

Became mandatory since December 1, 2006 TÜV SÜD (Thailand)

Slide 4

China Compulsory Certification

CHINA Approval Authorities for CCC approval  CQC (China Quality Certification Center): National Certification body authorized to undertake the task of China Compulsory Certification (CCC).  

TÜV SÜD (Thailand)

CCAP (China Certification Center for Automotive Products): Automotive Product Certification (CCC) and Management System Certification Body.

Slide 5

China Compulsory Certification China Quality Certification OR Centre


China Certification Center for Automotive Products

+ Type Testing

Chinese Test Labs

+ Initial Factory Inspection

China Quality Certification Centre

+ Follow-up Factory Inspection

or persons registered by China Certification & Accreditation Association

TÜV SÜD (Thailand)

No Foreign Labs ! China Certification Center for Automotive Products China Certification Centre for Automotive Products Slide 6

China Compulsory Certification 

List of official laboratories in CHINA: 

NAST: National Automobile Quality Supervision Test Center (Xiangfang- HUBEI Province)

SMVIC: National Center of Supervision and Inspection on Motor vehicles Products Quality (Shanghai)

CATARC: China Automotive Technology & Research Center (Tianjin)

CNMTC: China National Motorcycle Testing Center (Xian – Shaanxi Province)


 


Xian 



TÜV SÜD (Thailand)

Slide 7

China Compulsory Certification: Initial Inspection of the Factory Once the products have passed the type test, the authority will arrange Initial Assessment to the factory. The factory inspection will take normally 6 days and the following aspects will be checked by the inspectors: 

Responsibility and resources

Records and documentations

Purchase and incoming inspection

Production control

Routine test and type test

Measuring facility

Non-conformity product control

Packing, conveying and storage

Internal audit

TÜV SÜD (Thailand)

Slide 8

China Compulsory Certification: Initial Inspection of the Factory

Inspection Scope: 1. Capability of factory quality assurance and shall covered the products to be certified and processing premising 2. Check the consistency of the product

Evaluation: 1. Will be done after the results of both factory inspection and sample test are conform to the requirements 2. Then, the certification body shall issue the certification(s)

TÜV SÜD (Thailand)

Slide 9

China Compulsory Certification: Initial Inspection of the Factory

Non-conformities 1. Non-conformities found in FI must be corrected in 3 months; 2. Non-conformities of product sampling test must be corrected and re-test in 3 months If correction cannot be completed within 3 months, the certification will be terminated, then application can be submit again.

TÜV SÜD (Thailand)

Slide 10

China Compulsory Certification: Follow - up inspection

Frequency: at least once per year and shall be implemented 12 months after the certificate being granted

Content of the follow-up inspection: 1. Model of the follow-up inspection 2. Re-assessment of factory quality assurance ability + consistency inspection + sampling test

TÜV SÜD (Thailand)

Slide 11

China Compulsory Certification: Marking



TÜV SÜD (Thailand)

Safety + EMC

Fire Safety

Slide 12

Worldwide Homologations

CHINA (CCC-mark)

Brazil (INMETRO/I-mark)

TÜV SÜD Thailand


Slide 13


TÜV SÜD (Thailand)

Slide 14

Brazilian System of Conformity Assessment - SBAC Ministry of Development, Industry and ForeignTrade


National Council of Metrology, Standardization and Industrial Quality

CONMETRO National Institute of Metrology, Standardization and Industrial Quality



Inter-Ministry Team Brazilian Committee for Conformity Assessment

Representatives from Goverment, Industry and Consumer Entities

CONMETRO Attributions: - Define and Supervise the National Policy of Metrology, Industrial standardization and Quality Certifications. - Establish Technical Regulations and Procedures for Quality Certifications

- Define Criteria and Procedures for Fiscalization and Penalties TÜV SÜD (Thailand)

Technical Committee to Support CONMETRO Current President: Mr. Mario Guitti (ANFAVEA / IQA) Brazilian Committee for Standardization ABNT – Brazilian Association of Technical Standards (NBR Standards) CB-05 – Subcommittee for Automotive Standards Slide 15 (located at IQA)







Superitendence of Manaus Free Trade Zone

Brazilian Development Bank

(Amazons State)

(Financing Agency)

National Institute of Metrology, Standardization and Industrial Quality

Ministry of Development, Industry and ForeignTrade




National Institute of Industrial Property

Brazilian Trade and Investment Promotion Agency

Brazilian Agency of Industrial Development

(Trademarks and Patents)


(Industrial Policy)

(Regulatory and Accreditation Body)

TÜV SÜD (Thailand)

Slide 16

INMETRO COMPLIANCE ASSESSMENT REQUIREMENTS FOR AUTOMOTIVE COMPONENTS. The Automotive Components included in this Edict are:  Bearing half  Electric fuel pumps for Otto cycle engines  Horns or similar equipment  Lamps for automotive vehicles  Light aluminum alloy pistons  Pins and locking rings  Piston rings  Suspension shock absorbers  Tempered and laminated safety glass  Tires  Wheels  Windshields

TÜV SÜD (Thailand)


Slide 17


TÜV SÜD (Thailand)


Slide 18


Summary Requirements: • • • • • • • • •

Legal Representative located in Brazil QM-System TS 16949/ ISO 9001 QM Audit Product data sheet Assessment of internal laboratory Initial product tests Maintenance product tests Maintenance QM Audit Identification Seal

TÜV SÜD (Thailand)


Slide 19

Ste 1: Contract

Contract certification

Legal Representative Brasil

HQ manufacturer

TUV SUD Brazil Contract testing

TÜV SÜD (Thailand)


Slide 20

Step 2: Initial Audit

Initial audit report QM

TUV SUD Brazil

TÜV SÜD (Thailand)


Slide 21

Step 3: Evaluation Family (Product Testing)

Evaluation families

Test report

Data sheet

TÜV SÜD (Thailand)


TUV SUD Brazil

Slide 22

Step 4: Registration INMETRO

Evaluation families

Test report

TUV SUD Brazil

Family list

Certification No

INMETRO web Legal Representative Brasil TÜV SÜD (Thailand)


Slide 23

Step 5: COP

Audit/ test report

12 months evaluation COP/QM 25% families

TÜV SÜD (Thailand)


TUV SUD Brazil

Slide 24


TÜV SÜD Thailand


Slide 25

Thank you for your attention Contact: Mr. Chanachai Marangsri [email protected]

TÜV SÜD Thailand


Slide 26